Plate Spacer

F310936-57

F310936-57
(NSN) National Stock Number
5365-00-038-3999
Federal Supply Classification
5365 Bushings, Rings, Shims and Spacers
Item Name Code
26979
Schedule B Code
7326908695
Summary

0.328 inches minimum and 0.343 inches maximum hole diameter, 3.350 inches minimum and 3.410 inches maximum overall length, 1.470 inches minimum and 1.530 inches maximum overall width, 0.340 inches minimum and 0.400 inches maximum outside corner bevel length along width, 0.340 inches minimum and 0.400 inches maximum outside corner bevel length along length, 2.290 inches minimum and 2.310 inches maximum center to center distance between bolt holes along length

DAC HCC DMIL RNCC
2 - - 3
RNVC SADC MSDS RNAAC
2 - - SB
Identification

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside_diameter_or_smallest_overall_outside_dimension_is_designated_as_a_tolerance/dimension_the_maximum_dimension_will_be_used_to_determine_compliance._excludes:gasket;_insulator_(as_modified)_and_mounting_pad,_electrical-electronic_component.____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

INC FIIG Concept Condition
26979 A07000 - 2
Specifications
Hole Diameter
0.328 inches minimum and 0.343 inches maximum
Details The length of a straight line which passes through the center of a hole,and terminates at the circumference.
Overall Length
3.350 inches minimum and 3.410 inches maximum
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Overall Width
1.470 inches minimum and 1.530 inches maximum
Details An overall measurement taken at right angles to the length of an item,in distinction from thickness.
Outside Corner Bevel Length Along Width
0.340 inches minimum and 0.400 inches maximum
Details None.
Outside Corner Bevel Length Along Length
0.340 inches minimum and 0.400 inches maximum
Details None.
Center To Center Distance Between Bolt Holes Along Length
2.290 inches minimum and 2.310 inches maximum
Details A measurement of the center to center distance between the bolt holes along the length.
Outside Edge To Bolt Hole Center Distance Along Width
0.410 inches minimum and 0.470 inches maximum
Details None.
Outside Edge To Bolt Hole Center Distance Along Length
0.750 inches nominal
Details None.
Bolt Hole Quantity
2
Details The number of bolt holes provided on the item.
Special Features
two corners at one end beveled
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Material
steel
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
sae 1010 assn std single material response
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment
paint
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment Document And Classification
mil-std-808,f221 lg fed std single treatment response
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
95100 - W -
RVC WCC TCC SHC
- 596 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
THE BOEING COMPANY DIV LEGACY WICHITA
CAGE: 82918
OKLAHOMA CITY , OK , 73135-5922
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5365-00-038-3999
What is the NIIN of the NSN 5365-00-038-3999?
The National Item Identification Number (NIIN) of the NSN 5365-00-038-3999 is 00-038-3999
When the NSN 5365-00-038-3999 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Nov 10, 1972
Does the NSN 5365-00-038-3999 contain any precious metals?
Type/content is unknown
Does the NSN 5365-00-038-3999 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2025 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA