Plate Spacer
1086351-6
0.167 inches minimum and 0.175 inches maximum hole diameter, 1.625 inches nominal overall length, 1.625 inches nominal overall width, 0.030 inches maximum inside corner radius, 0.397 inches minimum and 0.403 inches maximum aperture width, 0.897 inches minimum and 0.903 inches maximum aperture length
DAC | HCC | DMIL | RNCC |
---|---|---|---|
5 | - | - | 5 |
RNVC | SADC | MSDS | RNAAC |
---|---|---|---|
9 | - | - | HD |
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside_diameter_or_smallest_overall_outside_dimension_is_designated_as_a_tolerance/dimension_the_maximum_dimension_will_be_used_to_determine_compliance._excludes:gasket;_insulator_(as_modified)_and_mounting_pad,_electrical-electronic_component.____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
INC | FIIG | Concept | Condition |
---|---|---|---|
26979 | A07000 | - | 2 |
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Details
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.Details
A measurement taken at right angles to the length of an aperture,in distinction from thickness.Details
A measurement of the longest dimension of an aperture,in distinction from width.Details
None.Details
None.Details
A measurement of the center to center distance between the bolt holes along the width.Details
A measurement of the center to center distance between the bolt holes along the length.Details
None.Details
None.Details
The number of bolt holes provided on the item.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
---|---|---|---|---|---|---|---|
2106292-6 | 10001 | 1 | - | 3 | 2 | - | HD |
HMIC | PMIC | ESD/EMI | Criticality |
---|---|---|---|
N | S | - | - |
UFC | HMC | LTL | LCL |
---|---|---|---|
95100 | - | W | - |
RVC | WCC | TCC | SHC |
---|---|---|---|
- | 596 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
What is the NIIN of the NSN 5365-00-005-5486?
When the NSN 5365-00-005-5486 was assigned to the Federal Catalog?
Does the NSN 5365-00-005-5486 contain any precious metals?
Does the NSN 5365-00-005-5486 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.