Machine Bolt
907892
(NSN) National Stock Number
5306-01-056-2942
Federal Supply Classification
5306 Bolts
Item Name Code
01847
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.953 inches minimum and 1.125 inches maximum thread length, 1.063 inches minimum and 1.125 inches maximum fastener length, hexagon head style, 0.195 inches minimum and 0.211 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZG |
Identification
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01847 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.953 inches minimum and 1.125 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
1.063 inches minimum and 1.125 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.195 inches minimum and 0.211 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.489 inches minimum and 0.500 inches maximum
Details
None.Nominal Thread Diameter
0.312 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Features Provided
finished head
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Thread Quantity Per Inch
18
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
120000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hardness Rating
25.0 rockwell c minimum overall and 34.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Criticality Code Justification
zzzx
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall and chromate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Surface Treatment Document And Classification
qq-p-416,type 2,class 3 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Nondefinitive Spec/Std Data
2 type and 5 grade and 10p style
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Departure From Cited Document
as differentiated by material which must conform to ships parts control center special quality control provisions
Details
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.Departure From Cited Designator
as mod by matl
Details
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 5306PL0677171 | 9009H | 9 | - | 6 | 9 | - | WP |
| FF-S-85 | 81348 | 4 | - | 4 | 1 | - | KZ |
| MS90725-35 | 80205 | E | - | 3 | 2 | - | ZZ |
| MS90725-35 | 96906 | 4 | - | 5 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5306-01-056-2942
What is the NIIN of the NSN 5306-01-056-2942?
The National Item Identification Number (NIIN) of the NSN 5306-01-056-2942 is 01-056-2942
When the NSN 5306-01-056-2942 was assigned to the Federal Catalog?
It was assigned 46 years ago, on Sun, Feb 19, 1978
Does the NSN 5306-01-056-2942 contain any precious metals?
Type/content is unknown
Does the NSN 5306-01-056-2942 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5306-01-056-2942?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products