Machine Bolt

Name: Machine Bolt
SKU: 5306000501237
Availability: InStock

19H1813

(NSN) National Stock Number

5306-00-050-1237

Federal Supply Classification

5306 Bolts

Item Name Code

01847

Schedule B Code

8486900000

Summary

2a thread class, right-hand thread direction, 0.511 inches minimum thread length, 0.594 inches minimum and 0.625 inches maximum fastener length, hexagon head style, 0.195 inches minimum and 0.211 inches maximum head height

DAC	HCC	DMIL	RNCC
A	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	KZ

Identification

An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.

INC	FIIG	Concept	Condition
01847	A003B0	-	1

Specifications

Thread Class

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction

right-hand

Details

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

Thread Length

0.511 inches minimum

Details

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

Fastener Length

0.594 inches minimum and 0.625 inches maximum

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

hexagon

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Head Height

0.195 inches minimum and 0.211 inches maximum

Details

A measurement from the bottom to the top of the head,in distinction from depth.

Width Between Flats

0.489 inches minimum and 0.500 inches maximum

Details

None.

End Item Identification

mrap - m-atv ui

Details

The national stock number or the identification information of the end equipment for which the item is a part.

Nominal Thread Diameter

0.312 inches

Details

The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

Features Provided

finished head

Details

Those features,not otherwise specified,which may be required for proper functioning of the item.

Thread Quantity Per Inch

Details

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Minimum Tensile Strength

150000 pounds per square inch

Details

The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

Hardness Rating

32.0 rockwell c minimum and 38.0 rockwell c maximum overall

Details

A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

Material Document And Classification

sae gr 8 assn std single material response overall

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Surface Treatment

zinc and chromate overall

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

astm b633 ty 2 sc 3 assn std single treatment response overall

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Thread Series Designator

unf

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
5306000501237	A00AM	9	-	6	9	-	YP
303836	H0G87	4	-	5	2	-	ZN
B1821BH031F063N	80204	E	-	5	9	-	ZZ
FF-S-85	81348	E	-	5	9	-	KZ
AEB02F312625AW9A91	05047	E	-	3	2	-	ZZ
ASME B18.2.1	05047	E	-	5	1	-	ZZ
18KP711	45152	4	-	5	9	-	ZZ
18KP711	75Q65	4	-	5	1	-	ZZ
MS90727-31	96906	E	-	5	9	-	XX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
48950	-	W	-

RVC	WCC	TCC	SHC
-	573	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Genuine Manufacturers Parts
100% Product Inspection
7 Year Sales Record Retention
Fast On-Time Delivery
HAZMAT Certified
Global Shipping

Manufacturer

DEERE & CO

CAGE: 75160

MOLINE , IL , 61265

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5306-00-050-1237

What is the NIIN of the NSN 5306-00-050-1237?

The National Item Identification Number (NIIN) of the NSN 5306-00-050-1237 is 00-050-1237

When the NSN 5306-00-050-1237 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Sun, Jan 1, 1961

Does the NSN 5306-00-050-1237 contain any precious metals?

Does not contain precious metal

Does the NSN 5306-00-050-1237 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.