Machine Bolt
MS35764-520
(NSN) National Stock Number
5306-00-021-4259
Federal Supply Classification
5306 Bolts
Item Name Code
01847
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 1.594 inches minimum and 1.750 inches maximum thread length, 1.670 inches minimum and 1.750 inches maximum fastener length, undercut hexagon head style, 0.438 inches minimum and 0.458 inches maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | 9Z |
Identification
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01847 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
1.594 inches minimum and 1.750 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
1.670 inches minimum and 1.750 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
undercut hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.438 inches minimum and 0.458 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.985 inches minimum and 1.000 inches maximum
Details
None.Locking Feature
distortions bearing surface of head
Details
An element inserted into the fastener,or a design feature,that enables the fastener to effectively resist vibration and rotation.Nominal Thread Diameter
0.750 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Features Provided
finished head
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Thread Quantity Per Inch
16
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
150000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hardness Rating
25.0 rockwell c minimum overall and 34.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm a449,grade 8 assn std single material response overall or sae j429,grade 8 assn std single material response overall or gm 300-m mfr ref single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall and chromate overall or zinc overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,type 2,class 3 fed spec 1st treatment response overall or astm b633,type 1,class 3 assn std 2nd treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Specification/Standard Data
81349-mil-b-45912 government specification and 96906-ms35764 rev d/inactive/ government standard
Details
The document designator of the specification or standard which established the item of supply.Nondefinitive Spec/Std Data
b composition
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Departure From Cited Document
as modified by optional zinc coated surf. treat.
Details
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 214259 | 24617 | 4 | - | 5 | 9 | - | 9Z |
| 9408997 | 24617 | 5 | - | 5 | 9 | - | 9Z |
| 214259 | 19207 | 2 | - | 5 | 9 | - | 9Z |
| MIL-B-45912 | 81349 | 4 | - | 4 | 1 | - | 9Z |
| MS35764-1120 | 96906 | E | - | 2 | 2 | - | 9Z |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 96906
FAQs
Frequently asked questions for NSN 5306-00-021-4259
What is the NIIN of the NSN 5306-00-021-4259?
The National Item Identification Number (NIIN) of the NSN 5306-00-021-4259 is 00-021-4259
When the NSN 5306-00-021-4259 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5306-00-021-4259 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-021-4259 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products