Eye Bolt
1388052
(NSN) National Stock Number
5306-00-004-2782
Federal Supply Classification
5306 Bolts
Item Name Code
01853
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.625 inches minimum thread length, 1.187 inches nominal eye inside diameter, 0.218 inches nominal shoulder thickness, 0.750 inches nominal shank length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | HD |
Identification
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes:connector, rod end.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01853 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.625 inches minimum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Eye Inside Diameter
1.187 inches nominal
Details
The length of a straight line which passes through the center of the eye and terminates at the inner periphery.Shoulder Thickness
0.218 inches nominal
Details
None.Shank Length
0.750 inches nominal
Details
A measurement of the longest dimension of the shank,in distinction from width.Eye Stock Diameter
0.437 inches nominal
Details
None.Shoulder Diameter
0.875 inches nominal
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Overall Length
3.219 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Nominal Thread Diameter
0.500 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
13
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Distance From Center Of Eye To Shank End
2.187 inches nominal
Details
None.Eye Outside Width
2.062 inches nominal
Details
None.Special Features
drop forged and heat treated
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
paint overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-std-1303,system 46a mil std single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
round, closed w/shoulder
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
10001-1388052 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1388052 | 53711 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | U |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
CAGE: 10001
WASHINGTON
, DC
, 20376
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-004-2782
What is the NIIN of the NSN 5306-00-004-2782?
The National Item Identification Number (NIIN) of the NSN 5306-00-004-2782 is 00-004-2782
When the NSN 5306-00-004-2782 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jun 7, 1972
Does the NSN 5306-00-004-2782 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-004-2782 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products