Part Number 10120911-2 Mounting Plate

Between 1.970 inches and 2.030 inches

0.100 inches

Between 6.970 inches and 7.030 inches

0.179 inches all holes and 0.185 inches all holes

8

Unthreaded

There are two holes at each end of piece located 0.310 inches with a variation of plus or minus 0.030 inches from ends, the sets of two holes at the ends are located 6.375 inches from bsc along the length and 1.000 inces bsc along the width the first hole is located 0.988 inches from left end bsc holes, the second hole is located 2.388 inches from left end holes bsc, the third hole is located 3.588 inches from left end holes bsc, the fourth hole is located 5.188 inches from left end holes bsc the four holes are located 1.000 inch from the side of piece and 0.500 inches from end holes bsc all holes have a dia. Of 0.180 inches with a variation of plus 0.005 and minus 0.001 inches and csk 100 degrees with dia. Of 0.337 inches

QQ-A-250/11 federal specification single material response

Rectangular

MIL-A-8625, type 2, cl 1 military specification single treatment response

09205