Double Angle Bracket
9188077
(NSN) National Stock Number
5340-00-789-0808
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
20354
Schedule B Code
-
Summary
Stamped fabrication method, 0.602 inches minimum and 0.642 inches maximum first leg length, 4.980 inches minimum and 5.020 inches maximum second leg length, 0.480 inches minimum and 0.520 inches maximum second leg width, 0.268 inches minimum and 0.271 inches maximum first leg hole diameter, 0.230 inches minimum and 0.270 inches maximum second leg distance from edge to hole center along width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which may be less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also bracket, angle and bracket (1), mounting.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 20354 | A042A0 | - | 2 |
Specifications
Fabrication Method
stamped
Details
The process used in manufacturing the item.First Leg Length
0.602 inches minimum and 0.642 inches maximum
Details
A measurement of the longest dimension of the first leg, in distinction from width.Second Leg Length
4.980 inches minimum and 5.020 inches maximum
Details
A measurement of the longest dimension of the second leg, in distinction from width.Second Leg Width
0.480 inches minimum and 0.520 inches maximum
Details
None.First Leg Hole Diameter
0.268 inches minimum and 0.271 inches maximum
Details
None.Second Leg Distance From Edge To Hole Center Along Width
0.230 inches minimum and 0.270 inches maximum
Details
None.Second Leg Distance From Edge To Hole Center Along Length
0.225 inches minimum and 0.265 inches maximum
Details
None.Second Leg Slot Length
0.350 inches minimum and 0.390 inches maximum
Details
None.Second Leg Slot Width
0.194 inches minimum and 0.204 inches maximum
Details
None.First Leg Thickness
0.059 inches minimum and 0.065 inches maximum
Details
A measurement of the smallest dimension of the first leg,in distinction from length or width.Second Leg Thickness
0.059 inches minimum and 0.065 inches maximum
Details
A measurement of the smallest dimension of the second leg,in distinction from length or width.Center Section Height
3.010 inches minimum and 3.050 inches maximum
Details
None.Center Section Width
0.480 inches minimum and 0.520 inches maximum
Details
None.Center Section Thickness
0.059 inches minimum and 0.065 inches maximum
Details
None.First Leg Width
0.480 inches minimum and 0.520 inches maximum
Details
None.First Leg Distance From Edge To Hole Center Along Width
0.230 inches minimum and 0.270 inches maximum
Details
None.First Leg Distance From Edge To Hole Center Along Length
0.230 inches minimum and 0.270 inches maximum
Details
None.First Leg Style
square
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.First Leg Hole Arrangement Style
one hole
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.Second Leg Style
square
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.Second Leg Hole Arrangement Style
one slot
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.First Leg Angle
90.0 degrees nominal
Details
None.Second Leg Angle
90.0 degrees nominal
Details
None.Special Features
furnished with one nut,self-locking and one rubber strip
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Heat Treatment
h-14 strain hardened, 1/2 hard
Details
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.Style Designator
double angle
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 9188077 | 3D955 | 6 | - | 5 | 9 | - | BD |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 53880 | - | U | U |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 574 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
US ARMY AVIATION AND MISSILE COMMAND
CAGE: 18876
REDSTONE CENTRAL
, AL
, 35898-5000
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5340-00-789-0808
What is the NIIN of the NSN 5340-00-789-0808?
The National Item Identification Number (NIIN) of the NSN 5340-00-789-0808 is 00-789-0808
When the NSN 5340-00-789-0808 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Mon, Jan 1, 1962
Does the NSN 5340-00-789-0808 contain any precious metals?
Type/content is unknown
Does the NSN 5340-00-789-0808 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products