Part Number 596-7409876-2 Bumper

Product Features

Part to be annealed prior to final machining has lip at each short end: 0.23-0.25 in. Thick x 0.667 inch long has center lengthwise groove: 0.250 in. Wide x 0.22 in. Deep with arcs at each end with radii of 0.125 and bottom arc centered 0.50 in. From bottom of part part tapers from being 2.776-2.778 in. Wide on ungrooved surface to 2.281 in. Wide on other side has 0.50 in. Hole drilled thru, centered 12.750 in. From bottom end and countersunk 0.54 in. X 90 deg. On ungrooved surface