Eye Bolt
502AS2413
(NSN) National Stock Number
5306-00-106-3600
Federal Supply Classification
5306 Bolts
Item Name Code
01853
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.275 inches nominal thread length, 0.312 inches minimum and 0.314 inches maximum eye inside diameter, 0.545 inches minimum and 0.575 inches maximum distance from shoulder to thread end, 2.580 inches minimum and 2.600 inches maximum distance from shoulder to eye center
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes:connector, rod end.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01853 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.275 inches nominal
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Eye Inside Diameter
0.312 inches minimum and 0.314 inches maximum
Details
The length of a straight line which passes through the center of the eye and terminates at the inner periphery.Distance From Shoulder To Thread End
0.545 inches minimum and 0.575 inches maximum
Details
None.Distance From Shoulder To Eye Center
2.580 inches minimum and 2.600 inches maximum
Details
None.Eye Stock Thickness
0.290 inches minimum and 0.294 inches maximum
Details
None.Shoulder Length
0.115 inches minimum and 0.135 inches maximum
Details
The length of the enlarged portion/s/ located on the shank of the item.Shank Unthreaded Hole Diameter
0.065 inches minimum and 0.072 inches maximum first hole
Details
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.Overall Length
3.582 inches minimum and 3.602 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Nominal Thread Diameter
0.250 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
28
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Hardness Rating
36.0 rockwell c minimum and 40.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Distance From Center Of Eye To Shank End
3.270 inches minimum and 3.290 inches maximum
Details
None.Distance From Threaded End To Shank Hole Center
0.078 inches minimum and 0.098 inches maximum first hole
Details
The distance from the shank hole centerline to the threaded end.Eye Outside Width
0.615 inches minimum and 0.635 inches maximum
Details
None.Part Name Assigned By Controlling Agency
navy special project
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Material
steel comp 4340 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,type 1,class 2 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
round, closed
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER
CAGE: 30003
PATUXENT RIVER
, MD
, 20670-1547
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-106-3600
What is the NIIN of the NSN 5306-00-106-3600?
The National Item Identification Number (NIIN) of the NSN 5306-00-106-3600 is 00-106-3600
When the NSN 5306-00-106-3600 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, May 19, 1972
Does the NSN 5306-00-106-3600 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-106-3600 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5306-00-106-3600?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.