Externally Relieved Body Bolt
AL14135A
(NSN) National Stock Number
5306-00-130-6363
Federal Supply Classification
5306 Bolts
Item Name Code
06675
Schedule B Code
-
Summary
3a thread class, right-hand thread direction, 1.312 inches minimum thread length, 9.938 inches nominal fastener length, undercut pan no. 2 head style, 1.620 inches minimum and 1.625 inches maximum head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes:bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06675 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
1.312 inches minimum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
9.938 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
undercut pan no. 2
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
1.620 inches minimum and 1.625 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.875 inches nominal
Details
A measurement from the bottom to the top of the head,in distinction from depth.First Diameter From Head
0.938 inches nominal
Details
None.Second Diameter From Head
1.186 inches minimum and 1.187 inches maximum
Details
None.Third Diameter From Head
0.938 inches nominal
Details
None.Distance From Largest Bearing Surface Of Head To End Of First Diameter
2.688 inches nominal
Details
None.Distance From Largest Bearing Surface Of Head To End Of Second Diameter
5.688 inches nominal
Details
None.Distance From Largest Bearing Surface Of Head To End Of Third Diameter
8.375 inches nominal
Details
None.Nominal Thread Diameter
1.125 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
12
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Externally Relieved Body Diameter Quantity
3
Details
The number of externally relieved diameters on the body,adjacent to the head.Part Name Assigned By Controlling Agency
navy special project
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Special Features
groove 0.281 in. wide by 0.218 in. deep extends full height of head,thread end of bolt has diameter of 1.000 in. by 0.250 in. lg; two slots 0.199 in. wide by 0.281 in. depth on thread end slots 67-1/2 deg apart
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Surface Treatment
phosphate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NAVAL INVENTORY CONTROL POINT MECHANICSBURG
CAGE: 03950
MECHANICSBURG
, PA
, 17055-0788
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5306-00-130-6363
What is the NIIN of the NSN 5306-00-130-6363?
The National Item Identification Number (NIIN) of the NSN 5306-00-130-6363 is 00-130-6363
When the NSN 5306-00-130-6363 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Fri, Dec 20, 1968
Does the NSN 5306-00-130-6363 contain any precious metals?
Does not contain precious metal
Does the NSN 5306-00-130-6363 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5306-00-130-6363?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.