Sleeve Bushing

128CM12242-1

128CM12242-1
(NSN) National Stock Number
3120-00-063-5328
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13206
Schedule B Code
8482997060
Summary

0.5830 inches minimum and 0.5950 inches maximum overall length, 0.9974 inches minimum and 0.9980 inches maximum body outside diameter, 0.7495 inches minimum and 0.7505 inches maximum body inside diameter, 1.6870 inches nominal flange outside diameter, 0.0910 inches minimum and 0.0930 inches maximum flange width, chamfered inside right corner corner shape

DAC HCC DMIL RNCC
5 - - C
RNVC SADC MSDS RNAAC
1 9X - ZZ
Identification

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

INC FIIG Concept Condition
13206 A045A0 - 2
Specifications
Overall Length
0.5830 inches minimum and 0.5950 inches maximum
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Outside Diameter
0.9974 inches minimum and 0.9980 inches maximum
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Body Inside Diameter
0.7495 inches minimum and 0.7505 inches maximum
Details The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
Flange Outside Diameter
1.6870 inches nominal
Details The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
Flange Width
0.0910 inches minimum and 0.0930 inches maximum
Details A measurement taken at right angles to the length of a flange,in distinction from thickness.
Corner Shape
chamfered inside right corner
Details The physical configuration of the corner.
Corner Shape
square inside left corner
Details The physical configuration of the corner.
Corner Shape
square left flange body corner
Details The physical configuration of the corner.
Corner Shape
square outside left corner
Details The physical configuration of the corner.
Corner Shape
square left flange outside right corner
Details The physical configuration of the corner.
Corner Shape
square outside right corner
Details The physical configuration of the corner.
Hardness Rating
33.0 rockwell c minimum overall and 37.0 rockwell c maximum overall
Details A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
Surface Finish
125.0 microinches intermediate layer
Details Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
Material
steel comp e4340 overall
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
mil-s-5000 mil spec single material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Style Designator
solid, external flange one end
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
128CM12242-1 26512 X - 5 9 - XX
128CM12242-1 65777 5 - 3 2 - ZZ
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
59240 - R -
RVC WCC TCC SHC
- 713 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION
CAGE: 79RG9
JACKSONVILLE , FL , 32221-8130
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3120-00-063-5328
What is the NIIN of the NSN 3120-00-063-5328?
The National Item Identification Number (NIIN) of the NSN 3120-00-063-5328 is 00-063-5328
When the NSN 3120-00-063-5328 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 3120-00-063-5328 contain any precious metals?
Type/content is unknown
Does the NSN 3120-00-063-5328 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA