Sleeve Bearing
57581P10
(NSN) National Stock Number
3120-00-009-9654
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13205
Schedule B Code
8482997090
Summary
0.9900 inches minimum and 1.0100 inches maximum overall length, 0.8875 inches minimum and 0.8885 inches maximum body outside diameter, 0.6840 inches minimum and 0.6860 inches maximum body inside diameter, 1.1150 inches minimum and 1.1350 inches maximum flange outside diameter, 0.0610 inches minimum and 0.0630 inches maximum flange width, chamfered outside right corner corner shape
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13205 | A045A0 | - | 1 |
Specifications
Overall Length
0.9900 inches minimum and 1.0100 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.8875 inches minimum and 0.8885 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
0.6840 inches minimum and 0.6860 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Flange Outside Diameter
1.1150 inches minimum and 1.1350 inches maximum
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.0610 inches minimum and 0.0630 inches maximum
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Corner Shape
chamfered outside right corner
Details
The physical configuration of the corner.Corner Shape
square inside left corner
Details
The physical configuration of the corner.Corner Shape
square left flange body corner
Details
The physical configuration of the corner.Corner Shape
square inside right corner
Details
The physical configuration of the corner.Corner Shape
square outside left corner
Details
The physical configuration of the corner.Corner Shape
square left flange outside right corner
Details
The physical configuration of the corner.Hardness Rating
26.0 rockwell c minimum outside diameter surface of body and 32.0 rockwell c maximum outside diameter surface of body
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Hardness Rating
26.0 rockwell c minimum outside diameter surface of flange and 32.0 rockwell c maximum outside diameter surface of flange
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Surface Finish
63.0 microinches left end surface of body and flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
63.0 microinches outside diameter surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
63.0 microinches right end surface of left flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
90.0 microinches right end surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Special Features
three (3) points equally spaced on underside of flange,od surface of body on right end thd 0.875-16 n-3,0.330 in. min. to 0.350 in. max. lg.
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
copper alloy inside diameter surface of body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel outside diameter surface of body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 4520 assn std single material response inside diameter surface of body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
ams 6322 assn std single material response outside diameter surface of body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
solid, external flange one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58880 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 742 | Z | Z |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP.
CAGE: 00198
LONGUEUIL
, QC
, J4G 1A1
CANADA
View Products
FAQs
Frequently asked questions for NSN 3120-00-009-9654
What is the NIIN of the NSN 3120-00-009-9654?
The National Item Identification Number (NIIN) of the NSN 3120-00-009-9654 is 00-009-9654
When the NSN 3120-00-009-9654 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Aug 11, 1972
Does the NSN 3120-00-009-9654 contain any precious metals?
Type/content is unknown
Does the NSN 3120-00-009-9654 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.