Sleeve Bearing Half
MS13855-1
(NSN) National Stock Number
3120-00-325-6198
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
22210
Schedule B Code
8483308090
Summary
0.1875 inches minimum first and 0.3120 inches maximum first hole diameter, 2.8380 inches minimum and 2.8480 inches maximum overall length, 3.9930 inches minimum and 4.0130 inches maximum body outside diameter, 3.7424 inches minimum and 3.7634 inches maximum body inside diameter, lubricating oil lubrication material, 0.2500 inches nominal first distance from centerline of opening to left end of bearing
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 2 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | AX |
Identification
A half of a two-piece split type bearing, sleeve.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22210 | A045A0 | - | 1 |
Specifications
Hole Diameter
0.1875 inches minimum first and 0.3120 inches maximum first
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Overall Length
2.8380 inches minimum and 2.8480 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
3.9930 inches minimum and 4.0130 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
3.7424 inches minimum and 3.7634 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Lubrication Material
lubricating oil
Details
The element compound or mixture with which the item is lubricated. please use mrc lbma as a replacement for canceled mrc.Distance From Centerline Of Opening To Left End Of Bearing
0.2500 inches nominal first
Details
The distance,measured along a straight line parallel to the longitudinal axis of the bearing,from the center of the aperture to the left end of the bearing.Distance From Centerline Of Opening To Left End Of Bearing
1.4220 inches nominal second
Details
The distance,measured along a straight line parallel to the longitudinal axis of the bearing,from the center of the aperture to the left end of the bearing.Distance From Centerline Of Opening To Left End Of Bearing
1.9530 inches nominal third
Details
The distance,measured along a straight line parallel to the longitudinal axis of the bearing,from the center of the aperture to the left end of the bearing.Lubricant Accommodation Style
grooved circular
Details
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.Locking Lug Height
0.0450 inches minimum and 0.0550 inches maximum
Details
A measurement from the outer surface of an item to the outermost point of the locking lug.Locking Lug Length
0.1900 inches minimum and 0.2200 inches maximum
Details
The distance,measured along a straight line parallel to the longitudinal axis of the lug,from one edge to the other.Locking Lug Width
0.2380 inches minimum and 0.2430 inches maximum
Details
The distance,measured along a straight line,perpendicular to the longitudinal axis of the lug,from one edge to the other.Corner Shape
square all corners
Details
The physical configuration of the corner.Antirotation/Lubrication Type And Quantity
10 hole
Details
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.Surface Groove Location And Quantity
3 internal
Details
Indicates the location and number of grooves on the surface of the item.Distance From Lug End To End Of Bearing
1.4460 inches minimum and 1.4485 inches maximum
Details
None.Material
steel comp 1010 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
tin overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Style Designator
half sleeve, plain, no outside flanges
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58880 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 96906
FAQs
Frequently asked questions for NSN 3120-00-325-6198
What is the NIIN of the NSN 3120-00-325-6198?
The National Item Identification Number (NIIN) of the NSN 3120-00-325-6198 is 00-325-6198
When the NSN 3120-00-325-6198 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 3120-00-325-6198 contain any precious metals?
Type/content is unknown
Does the NSN 3120-00-325-6198 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.