Rod End Plain Bearing
114CS125-4
(NSN) National Stock Number
3120-00-410-5949
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13209
Schedule B Code
8483308055
Summary
3a thread class, right-hand thread direction, externally threaded shank style, 3.0790 inches minimum and 3.1215 inches maximum overall length, 0.4995 inches minimum and 0.5000 inches maximum bore diameter, 1.3020 inches minimum and 1.3470 inches maximum outer member outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 1 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CT |
Identification
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes:bearing, plain, spherical and bearing, plain, self-aligning.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13209 | A045A0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Shank Style
externally threaded
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Overall Length
3.0790 inches minimum and 3.1215 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Bore Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.Outer Member Outside Diameter
1.3020 inches minimum and 1.3470 inches maximum
Details
None.Bore Center To Shank End Distance
2.4280 inches minimum and 2.4480 inches maximum
Details
None.Outer Member Width
0.5100 inches minimum and 0.5200 inches maximum
Details
None.Inner Member Width
0.6200 inches minimum and 0.6250 inches maximum
Details
None.Shank Thread Length
1.4700 inches minimum and 1.5600 inches maximum
Details
None.Static Radial Load Rating
16900 pounds
Details
The limiting radial load which the item can carry at rest without permanent deformation of the stressed surface or the danger of fracture.Thread Diameter
0.500 inches nominal
Details
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
20
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Special Features
9deg max misalignment
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Style Designator
ball type
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
77272-5424 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 114CS125-4 | 09455 | 1 | - | 3 | 2 | - | ZZ |
| 77362 | 09455 | 5 | - | 5 | 9 | - | ZZ |
| 114CS125-4 | 15860 | 1 | - | 3 | 2 | - | ZZ |
| ATHE8-160 | 15860 | 5 | - | 5 | 9 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 3120-00-410-5949
What is the NIIN of the NSN 3120-00-410-5949?
The National Item Identification Number (NIIN) of the NSN 3120-00-410-5949 is 00-410-5949
When the NSN 3120-00-410-5949 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Wed, Aug 20, 1969
Does the NSN 3120-00-410-5949 contain any precious metals?
Type/content is unknown
Does the NSN 3120-00-410-5949 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products