Rod End Roller Bearing
1292035-103
(NSN) National Stock Number
3110-01-211-7519
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
00050
Schedule B Code
8482500000
Summary
3a thread class, right-hand thread direction, 0.7500 inches nominal shank diameter, externally threaded shank style, 5.7650 inches nominal overall length, 0.7500 inches nominal bore diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A special single or multiple-row roller bearing, rigid or self-aligning, and constructed with either inside threaded, plain hollow, maile threaded, or solid shank.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00050 | A044A0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Shank Diameter
0.7500 inches nominal
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
externally threaded
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Overall Length
5.7650 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Bore Diameter
0.7500 inches nominal
Details
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.Shank Thread Length
2.5500 inches minimum and 2.5700 inches maximum
Details
None.Outer Ring Width
0.8750 inches nominal
Details
None.Inner Ring Width
1.2500 inches nominal
Details
None.Length From Bore Center To Shank End
4.5000 inches nominal
Details
None.Retainer Fabrication Method
machined
Details
The means used in manufacturing the retainer.Seal Quantity
2
Details
The number of seals included on the item.Bearing Seal Type
contact
Details
Indicates the type of seal provided with the bearing.Alignment Type
self-aligning
Details
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.Internal Fit-Up Designation
standard
Details
The designation specifying the type of fit as recognized by industrial and governmental agencies.Self-Alignment Location
internal
Details
Indicates the location of the self-alignment feature.Thread Quantity Per Inch
16
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.750 inches
Details
A designation that is used for the purpose of general identification of the thread.Self-Alignment Angle
8.00 degrees nominal
Details
None.Special Features
plating on bearing only
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Lubrication Material
grease
Details
The chemical compound or mechanical mixture properties with which the item is lubricated.Material
copper alloy retainercopper alloy retainer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
rubber butadiene-acrylonitrile class nbr sealrubber butadiene-acrylonitrile class nbr seal
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 4140 outside washerssteel comp 4140 outside washers
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 4140 sleevesteel comp 4140 sleeve
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e4340 rod end bodysteel comp e4340 rod end body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 inner ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 outer ringsteel comp e52100 outer ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 rollersteel comp e52100 roller
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
aisi assn std single material response inner ring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
aisi assn std single material response outer ringaisi assn std single material response outer ring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
aisi assn std single material response outside washersaisi assn std single material response outside washers
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
aisi assn std single material response rolleraisi assn std single material response roller
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
aisi assn std single material response sleeveaisi assn std single material response sleeve
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-5000 mil spec single material response rod end bodymil-s-5000 mil spec single material response rod end body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium all external/exposed metal surfaces
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,type 1,class 2 fed spec single treatment response all external/exposed metal surfaces
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
double row, concave rollers
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
36659-lc+72-1076 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1292035-103 | 98897 | A | - | 3 | 2 | - | KZ |
| 1292035-103 | 80378 | 5 | - | 5 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC DBA AEROENGINEERING & MANUFACTURING CO
CAGE: 17772
VALENCIA
, CA
, 91355-1249
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3110-01-211-7519
What is the NIIN of the NSN 3110-01-211-7519?
The National Item Identification Number (NIIN) of the NSN 3110-01-211-7519 is 01-211-7519
When the NSN 3110-01-211-7519 was assigned to the Federal Catalog?
It was assigned 39 years ago, on Sun, Jun 30, 1985
Does the NSN 3110-01-211-7519 contain any precious metals?
Does not contain precious metal
Does the NSN 3110-01-211-7519 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products