Duplex Ball Bearing
206-040-408-1
(NSN) National Stock Number
3110-00-179-7397
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
30213
Schedule B Code
8482105068
Summary
1.2398 inches minimum and 1.2598 inches maximum overall width, 1.1809 inches minimum and 1.1811 inches maximum bore diameter, 2.4405 inches minimum and 2.4409 inches maximum overall outside diameter, ground surface finish, machined retainer fabrication method, angular load direction
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 1 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CT |
Identification
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 30213 | A044A0 | - | 1 |
Specifications
Overall Width
1.2398 inches minimum and 1.2598 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Bore Diameter
1.1809 inches minimum and 1.1811 inches maximum
Details
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.Overall Outside Diameter
2.4405 inches minimum and 2.4409 inches maximum
Details
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.Surface Finish
ground
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Retainer Fabrication Method
machined
Details
The means used in manufacturing the retainer.Load Direction
angular
Details
The direction of load with respect to the shaft axis.Internal Clearance
0.0002 inches maximum axial
Details
The clearance between the bearing rings and the rolling elements.Standard Tolerance Designation
abec no.3
Details
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.Material
plastic retainer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e51100 ball
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 inner ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 outer ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
206-040-408-1,97499 mfr ref single material response retainer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
fed-std-66 fed std single material response ball
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
fed-std-66 fed std single material response inner ring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
fed-std-66 fed std single material response outer ring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
counterbored outer rings, non-separable, back to back mounting
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
21335-aps-36a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 21335-aps-33a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47162a7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47163a7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47168 1 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| M7206PW4NGSRDUE8382 | 21335 | 5 | - | 5 | 9 | - | CT |
| 456815 | 52676 | 1 | - | 3 | 2 | - | CT |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 3110-00-179-7397
What is the NIIN of the NSN 3110-00-179-7397?
The National Item Identification Number (NIIN) of the NSN 3110-00-179-7397 is 00-179-7397
When the NSN 3110-00-179-7397 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Fri, Apr 25, 1969
Does the NSN 3110-00-179-7397 contain any precious metals?
Does not contain precious metal
Does the NSN 3110-00-179-7397 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 3110-00-179-7397?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products