Bearing Retaining Plate
S1505-3651
(NSN) National Stock Number
3110-00-982-9983
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
22293
Schedule B Code
8482997090
Summary
2.864 inches minimum and 2.884 inches maximum outside diameter, 0.265 inches nominal mounting hole diameter, 1.220 inches minimum and 1.227 inches maximum aperture diameter, single bolt hole circle mounting hole arrangement style, 0.375 inches nominal corner radius, 3 bolt circle hole quantity
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CT |
Identification
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes:end bell, electrical rotating equipment.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22293 | A093A0 | - | 1 |
Specifications
Outside Diameter
2.864 inches minimum and 2.884 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Mounting Hole Diameter
0.265 inches nominal
Details
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.Aperture Diameter
1.220 inches minimum and 1.227 inches maximum
Details
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.Mounting Hole Arrangement Style
single bolt hole circle
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).Corner Radius
0.375 inches nominal
Details
A measurement of a straight line from the midpoint of a rounded corner to its periphery.Bolt Circle Hole Quantity
3
Details
The number of holes in a bolt circle.Overall Thickness
0.125 inches nominal
Details
An overall measurement of the smallest dimension of an item,in distinction from length or width.Mounting Bolt Circle Diameter
2.312 inches nominal
Details
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.Raised Surface Height
0.250 inches nominal
Details
A measurement from the bottom to the top of a raised surface,in distinction from depth.Hardness Rating
34.0 rockwell c minimum and 38.0 rockwell c maximum
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Mounting Hole Type
round, unthreaded
Details
Indicates the type of mounting hole(s) provided on the item.First Raised Surface Outside Diameter
1.260 inches minimum and 1.267 inches maximum
Details
None.Special Features
id countersunk 80 deg to 1.493 in.min,1.500 in.max dia;1.000 in. distance from center hole to flat center;raised surface feature:included;aperture shape round and included;shape:round
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 4130 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall and chromate overall or cadmium overall and phosphate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Test Data Document
81349-mili6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58880 | - | Q | W |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP
CAGE: 78286
STRATFORD
, CT
, 06614-1378
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3110-00-982-9983
What is the NIIN of the NSN 3110-00-982-9983?
The National Item Identification Number (NIIN) of the NSN 3110-00-982-9983 is 00-982-9983
When the NSN 3110-00-982-9983 was assigned to the Federal Catalog?
It was assigned 58 years ago, on Mon, Oct 17, 1966
Does the NSN 3110-00-982-9983 contain any precious metals?
Type/content is unknown
Does the NSN 3110-00-982-9983 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.