Bearing Retaining Plate
6435-20094-100
(NSN) National Stock Number
3110-00-983-7330
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
22293
Schedule B Code
8482997090
Summary
15.990 inches minimum and 16.010 inches maximum outside diameter, single bolt hole circle mounting hole arrangement style, 16 bolt circle hole quantity, 14.125 inches nominal mounting bolt circle diameter, 16 flute quantity, 34.0 rockwell c minimum and 38.0 rockwell c maximum hardness rating
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CT |
Identification
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes:end bell, electrical rotating equipment.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22293 | A093A0 | - | 1 |
Specifications
Outside Diameter
15.990 inches minimum and 16.010 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Mounting Hole Arrangement Style
single bolt hole circle
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).Bolt Circle Hole Quantity
16
Details
The number of holes in a bolt circle.Mounting Bolt Circle Diameter
14.125 inches nominal
Details
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.Flute Quantity
16
Details
The number of flutes provided.Hardness Rating
34.0 rockwell c minimum and 38.0 rockwell c maximum
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Surface Finish
100.0 microinches overall
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Flute Radius
0.375 inches nominal
Details
None.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-5000,cond f mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
oxide overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-c-13924,class 1 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
round with flutes
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mili6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Specification/Standard Data
78286-6435-20094-100 professional/industrial association standard
Details
The document designator of the specification or standard which established the item of supply.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP
CAGE: 78286
STRATFORD
, CT
, 06614-1378
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3110-00-983-7330
What is the NIIN of the NSN 3110-00-983-7330?
The National Item Identification Number (NIIN) of the NSN 3110-00-983-7330 is 00-983-7330
When the NSN 3110-00-983-7330 was assigned to the Federal Catalog?
It was assigned 58 years ago, on Wed, Oct 19, 1966
Does the NSN 3110-00-983-7330 contain any precious metals?
Type/content is unknown
Does the NSN 3110-00-983-7330 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.