Bearing Retaining Plate
369A5118-3
(NSN) National Stock Number
3110-01-085-5201
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
22293
Schedule B Code
8482997090
Summary
3.8750 inches minimum and 3.8753 inches maximum counterbore diameter, 0.360 inches nominal counterbore depth, 0.200 inches minimum and 0.205 inches maximum minor thickness, 4.746 inches nominal length, 0.280 inches minimum and 0.290 inches maximum mounting hole diameter, 3.590 inches nominal aperture diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes:end bell, electrical rotating equipment.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22293 | A093A0 | - | 1 |
Specifications
Counterbore Diameter
3.8750 inches minimum and 3.8753 inches maximum
Details
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.Counterbore Depth
0.360 inches nominal
Details
The depth of the process used to enlarge part of a hole.Minor Thickness
0.200 inches minimum and 0.205 inches maximum
Details
None.Length
4.746 inches nominal
Details
A measurement of the longest dimension of any object,in distinction from width.Mounting Hole Diameter
0.280 inches minimum and 0.290 inches maximum
Details
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.Aperture Diameter
3.590 inches nominal
Details
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.Mounting Hole Arrangement Style
single bolt hole circle
Details
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).Bolt Circle Hole Quantity
6
Details
The number of holes in a bolt circle.Overall Thickness
1.948 inches nominal
Details
An overall measurement of the smallest dimension of an item,in distinction from length or width.Mounting Bolt Circle Diameter
4.812 inches nominal
Details
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.Hardness Rating
30.0 rockwell c minimum and 35.0 rockwell c maximum
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Mounting Hole Type
round, unthreaded
Details
Indicates the type of mounting hole(s) provided on the item.Special Features
mounting configuration:5 holes at 60 deg spacing,1 hole at 5 deg off centerline;aperture shape:round and included;aperture corner radius:0.035 in.radius;aperture type:counterbored;shape:special
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 4140 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 369A5118-3 | 02731 | 1 | - | 5 | 9 | - | CT |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 742 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 3110-01-085-5201
What is the NIIN of the NSN 3110-01-085-5201?
The National Item Identification Number (NIIN) of the NSN 3110-01-085-5201 is 01-085-5201
When the NSN 3110-01-085-5201 was assigned to the Federal Catalog?
It was assigned 45 years ago, on Fri, Nov 9, 1979
Does the NSN 3110-01-085-5201 contain any precious metals?
Type/content is unknown
Does the NSN 3110-01-085-5201 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products