Shouldered Stud
53-69026-7
(NSN) National Stock Number
5307-00-061-9188
Federal Supply Classification
5307 Studs
Item Name Code
15946
Schedule B Code
7318155000
Summary
3a nut thread thread class, 3a stud thread thread class, right-hand nut thread thread direction, right-hand stud thread thread direction, 0.370 inches nominal stud thread thread length, 0.380 inches minimum nut thread thread length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also stud, locked in.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15946 | A051A0 | - | 1 |
Specifications
Thread Class
3a nut thread
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Class
3a stud thread
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand nut thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand stud thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.370 inches nominal stud thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Thread Length
0.380 inches minimum nut thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Shoulder Length
0.562 inches nominal
Details
The length of the enlarged portion/s/ located on the shank of the item.Overall Length
1.425 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Nut End Shank Length
0.113 inches nominal
Details
None.Distance Across Flats
0.375 inches nominal
Details
The distance across the flats.Thread Quantity Per Inch
32 nut thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Thread Quantity Per Inch
32 stud thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.190 inches nut thread
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.190 inches stud thread
Details
A designation that is used for the purpose of general identification of the thread.Surface Finish
125.0 microinches overall
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Nut End Shank Diameter
0.184 inches minimum and 0.190 inches maximum
Details
None.Material
steel
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-6758,cond f mil spec single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
p.s.1310,type 1,class 3 mfr ref single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
shouldered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unf nut thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unf stud thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 50270 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
THE BOEING COMPANY DIV DEFENSE
CAGE: 76301
SAINT LOUIS
, MO
, 63134-1939
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5307-00-061-9188
What is the NIIN of the NSN 5307-00-061-9188?
The National Item Identification Number (NIIN) of the NSN 5307-00-061-9188 is 00-061-9188
When the NSN 5307-00-061-9188 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Tue, Jun 20, 1967
Does the NSN 5307-00-061-9188 contain any precious metals?
Type/content is unknown
Does the NSN 5307-00-061-9188 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.