Shouldered Stud
4J13049-101A
(NSN) National Stock Number
5307-00-254-1177
Federal Supply Classification
5307 Studs
Item Name Code
15946
Schedule B Code
7318155000
Summary
3a nut thread thread class, 3a stud thread thread class, right-hand nut thread thread direction, right-hand stud thread thread direction, 0.485 inches nominal stud thread thread length, 0.500 inches nominal nut thread thread length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also stud, locked in.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15946 | A051A0 | - | 1 |
Specifications
Thread Class
3a nut thread
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Class
3a stud thread
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand nut thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand stud thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.485 inches nominal stud thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Thread Length
0.500 inches nominal nut thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Shoulder Diameter
0.8725 inches minimum and 0.8738 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Shoulder Length
0.845 inches nominal
Details
The length of the enlarged portion/s/ located on the shank of the item.Overall Length
3.355 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Nut End Shank Length
0.730 inches nominal
Details
None.Distance From Cotter Pin Hole Centerline To Nut End
0.130 inches nominal first hole
Details
The distance,measured along a straight line parallel to the longitudinal axis,from the center of the cotter pin hole to the nut end of the item.Distance From Cotter Pin Hole Centerline To Nut End
0.130 inches nominal second hole
Details
The distance,measured along a straight line parallel to the longitudinal axis,from the center of the cotter pin hole to the nut end of the item.Cotter Pin Hole Diameter
0.109 inches minimum and 0.114 inches maximum first hole
Details
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.Cotter Pin Hole Diameter
0.109 inches minimum and 0.114 inches maximum second hole
Details
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.Thread Quantity Per Inch
24 nut thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Thread Quantity Per Inch
24 stud thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.375 inches nut thread
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.375 inches stud thread
Details
A designation that is used for the purpose of general identification of the thread.Stud End Shank Length
0.795 inches nominal
Details
None.Stud End Shank Diameter
0.5294 inches minimum and 0.5305 inches maximum
Details
None.Surface Finish
32.0 microinches body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Nut End Shank Diameter
0.5294 inches minimum and 0.5305 inches maximum
Details
None.Special Features
shoulder is eccentric to body
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel corrosion resisting
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6487 assn std single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
shouldered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unf nut thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unf stud thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 50270 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5307-00-254-1177
What is the NIIN of the NSN 5307-00-254-1177?
The National Item Identification Number (NIIN) of the NSN 5307-00-254-1177 is 00-254-1177
When the NSN 5307-00-254-1177 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Fri, Jul 18, 1969
Does the NSN 5307-00-254-1177 contain any precious metals?
Does not contain precious metal
Does the NSN 5307-00-254-1177 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.