Plain Stud
1215318-101
(NSN) National Stock Number
5307-01-028-1738
Federal Supply Classification
5307 Studs
Item Name Code
15948
Schedule B Code
-
Summary
3a nut thread thread class, 3a stud thread thread class, right-hand nut thread thread direction, right-hand stud thread thread direction, 0.340 inches nominal nut thread thread length, 0.340 inches nominal stud thread thread length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also rod, threaded end and rod, continuous thread.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15948 | A051A0 | - | 1 |
Specifications
Thread Class
3a nut thread
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Class
3a stud thread
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand nut thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand stud thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.340 inches nominal nut thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Thread Length
0.340 inches nominal stud thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Overall Length
1.530 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Distance From Cotter Pin Hole Centerline To Nut End
0.120 inches nominal first hole
Details
The distance,measured along a straight line parallel to the longitudinal axis,from the center of the cotter pin hole to the nut end of the item.Cotter Pin Hole Diameter
0.076 inches minimum and 0.086 inches maximum first hole
Details
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.Thread Quantity Per Inch
24 nut thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Thread Quantity Per Inch
24 stud thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.312 inches nut thread
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.312 inches stud thread
Details
A designation that is used for the purpose of general identification of the thread.Surface Finish
125.0 microinches overall
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Special Features
additional cotter pin hole on other end 0.076 in. min,0.086 in. max dia 0.120 in. from end
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp e4340
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-5000 mil spec single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Thread Series Designator
unf nut thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unf stud thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1215318-101 | 17772 | 5 | - | 5 | 2 | - | ZZ |
| 1215318-101 | 30205 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5307-01-028-1738
What is the NIIN of the NSN 5307-01-028-1738?
The National Item Identification Number (NIIN) of the NSN 5307-01-028-1738 is 01-028-1738
When the NSN 5307-01-028-1738 was assigned to the Federal Catalog?
It was assigned 48 years ago, on Sun, Sep 26, 1976
Does the NSN 5307-01-028-1738 contain any precious metals?
Type/content is unknown
Does the NSN 5307-01-028-1738 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products