Plain Stud
11345P12
(NSN) National Stock Number
5307-00-012-9338
Federal Supply Classification
5307 Studs
Item Name Code
15948
Schedule B Code
-
Summary
+0.2933 to 0.2959 inches stud thread thread pitch diameters, right-hand nut thread thread direction, right-hand stud thread thread direction, 0.615 inches minimum nut thread and 0.700 inches maximum nut thread thread length, 0.615 inches minimum stud thread and 0.725 inches maximum stud thread thread length, 1.553 inches minimum and 1.573 inches maximum overall length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | 9Z |
Identification
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also rod, threaded end and rod, continuous thread.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15948 | A051A0 | - | 1 |
Specifications
Thread Pitch Diameters
+0.2933 to 0.2959 inches stud thread
Details
The minimum and maximum pitch diameter limits of a straight screw thread.Thread Direction
right-hand nut thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand stud thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.615 inches minimum nut thread and 0.700 inches maximum nut thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Thread Length
0.615 inches minimum stud thread and 0.725 inches maximum stud thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Overall Length
1.553 inches minimum and 1.573 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Thread Quantity Per Inch
18 stud thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Thread Quantity Per Inch
24 nut thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.312 inches nut thread
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.312 inches stud thread
Details
A designation that is used for the purpose of general identification of the thread.Material
steel
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 7456 assn std single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
ams 2400 assn std single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unc stud thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unf nut thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| - | - | - | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | - | - | - |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP.
CAGE: 00198
LONGUEUIL
, QC
, J4G 1A1
CANADA
View Products
FAQs
Frequently asked questions for NSN 5307-00-012-9338
What is the NIIN of the NSN 5307-00-012-9338?
The National Item Identification Number (NIIN) of the NSN 5307-00-012-9338 is 00-012-9338
When the NSN 5307-00-012-9338 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 5307-00-012-9338 contain any precious metals?
Type/content is unknown
Does the NSN 5307-00-012-9338 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.