Wood Screw
MS35495-68
(NSN) National Stock Number
5305-00-265-4497
Federal Supply Classification
5305 Screws
Item Name Code
01867
Schedule B Code
7318120000
Summary
1.000 inches nominal fastener length, round head style, 0.287 inches minimum and 0.309 inches maximum head diameter, 0.107 inches minimum and 0.120 inches maximum head height, slot internal drive style, wood screw (type wd) nonmachine thread style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 2 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An unhardened externally threaded fastener whose continuous thread extends from a gimlet point for a distance of approximately two-thirds of the length of the screw and which is designed to be driven with an inserted driver.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01867 | A003B0 | - | 1 |
Specifications
Fastener Length
1.000 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.287 inches minimum and 0.309 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.107 inches minimum and 0.120 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Internal Drive Style
slot
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Nonmachine Thread Style
wood screw (type wd)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.Nonmachine Nominal Thread Diameter
0.164 inches
Details
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm a 549 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416 type 1,class 3 fed spec single treatment response overall or qq-p-416 type 2,class 3 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Test Data Document
81348-ff-s-111 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). or 96906-ms35495-68 standard (includes industry or association standards, individual manufactureer standards, etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Nondefinitive Spec/Std Data
1s style
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | U |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 96906
FAQs
Frequently asked questions for NSN 5305-00-265-4497
What is the NIIN of the NSN 5305-00-265-4497?
The National Item Identification Number (NIIN) of the NSN 5305-00-265-4497 is 00-265-4497
When the NSN 5305-00-265-4497 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 5305-00-265-4497 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-265-4497 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.