Wood Screw
MS35494-212
(NSN) National Stock Number
5305-00-290-2496
Federal Supply Classification
5305 Screws
Item Name Code
01867
Schedule B Code
7415330500
Summary
0.750 inches nominal fastener length, flat countersunk head style, 0.207 inches minimum and 0.225 inches maximum head diameter, slot internal drive style, wood screw (type wd) nonmachine thread style, 80.0 degrees minimum and 82.0 degrees maximum countersink angle
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 2 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An unhardened externally threaded fastener whose continuous thread extends from a gimlet point for a distance of approximately two-thirds of the length of the screw and which is designed to be driven with an inserted driver.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01867 | A003B0 | - | 1 |
Specifications
Fastener Length
0.750 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flat countersunk
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.207 inches minimum and 0.225 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Internal Drive Style
slot
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Nonmachine Thread Style
wood screw (type wd)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.Countersink Angle
80.0 degrees minimum and 82.0 degrees maximum
Details
The included angle of the countersink.Nonmachine Nominal Thread Diameter
0.112 inches
Details
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.Material
copper alloy overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-w-321,comp 6 or 7 fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Test Data Document
81348-ff-s-111 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). or 96906-ms35494-212 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Nondefinitive Spec/Std Data
2s style
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 50590 | - | Q | Q |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 96906
FAQs
Frequently asked questions for NSN 5305-00-290-2496
What is the NIIN of the NSN 5305-00-290-2496?
The National Item Identification Number (NIIN) of the NSN 5305-00-290-2496 is 00-290-2496
When the NSN 5305-00-290-2496 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5305-00-290-2496 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-290-2496 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.