Wood Screw
MS35492-85
(NSN) National Stock Number
5305-01-092-9898
Federal Supply Classification
5305 Screws
Item Name Code
01867
Schedule B Code
7318120000
Summary
2.690 inches minimum and 2.750 inches maximum fastener length, flat countersunk head style, 0.340 inches minimum and 0.385 inches maximum head diameter, cross recess type 1 internal drive style, 55000 pounds per square inch minimum tensile strength, wood screw (type wd) nonmachine thread style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 2 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
An unhardened externally threaded fastener whose continuous thread extends from a gimlet point for a distance of approximately two-thirds of the length of the screw and which is designed to be driven with an inserted driver.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01867 | A003B0 | - | 1 |
Specifications
Fastener Length
2.690 inches minimum and 2.750 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flat countersunk
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.340 inches minimum and 0.385 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Internal Drive Style
cross recess type 1
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Minimum Tensile Strength
55000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Nonmachine Thread Style
wood screw (type wd)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.Countersink Angle
80.0 degrees minimum and 82.0 degrees maximum
Details
The included angle of the countersink.Nonmachine Nominal Thread Diameter
0.190 inches
Details
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.Material
steel comp 1005 overall or steel comp 1006 overall or steel comp 1008 overall or steel comp 1009 overall or steel comp 1010 overall or steel comp 1011 overall or steel comp 1013 overall or steel comp 1015 overall or steel comp 1016 overall or steel comp 1017 overall or steel comp 1018 overall or steel comp 1019 overall or steel comp 1020 overall or steel comp 1021 overall or steel comp 1022 overall or steel comp 1023 overall or steel comp 1524 overall or steel comp 1025 overall or steel comp 1026 overall or steel comp 1527 overall or steel comp 1029 overall or steel comp 1030 overall or steel comp 1033 overall or steel comp 1034 overall or steel comp 1035 overall or steel comp 1536 overall or steel comp 1037 overall or steel comp 1038 overall or steel comp 1039 overall or steel comp 1040 overall or steel comp 1541 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall and chromate overall or zinc overall and chromate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416 ty 2 cl3 fed spec 1st treatment response overall or mil-c-81562 ty 2 cl 3 mil spec 1st treatment response overall or qq-z-325 ty 2 cl 3 fed spec 2nd treatment response overall or mil-c-81562 ty 2 cl 3 fed spec 2nd treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Nondefinitive Spec/Std Data
1 type and 2c style
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| FF-S-111 | 81348 | 4 | - | 4 | 1 | - | KZ |
| FFS111 | 81348 | 3 | - | 5 | 9 | - | 75 |
| AN550-10R22 | 88044 | X | - | 5 | 9 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 96906
FAQs
Frequently asked questions for NSN 5305-01-092-9898
What is the NIIN of the NSN 5305-01-092-9898?
The National Item Identification Number (NIIN) of the NSN 5305-01-092-9898 is 01-092-9898
When the NSN 5305-01-092-9898 was assigned to the Federal Catalog?
It was assigned 44 years ago, on Tue, Apr 8, 1980
Does the NSN 5305-01-092-9898 contain any precious metals?
Type/content is unknown
Does the NSN 5305-01-092-9898 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products