Wood Screw
MS16217-64
(NSN) National Stock Number
5305-00-543-5410
Federal Supply Classification
5305 Screws
Item Name Code
01867
Schedule B Code
7318120000
Summary
2.500 inches nominal fastener length, flat countersunk head style, 0.534 inches minimum and 0.597 inches maximum head diameter, cross recess type 1 internal drive style, 70000 pounds per square inch minimum tensile strength, 80.0 degrees minimum and 82.0 degrees maximum countersink angle
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 2 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An unhardened externally threaded fastener whose continuous thread extends from a gimlet point for a distance of approximately two-thirds of the length of the screw and which is designed to be driven with an inserted driver.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01867 | A003B0 | - | 1 |
Specifications
Fastener Length
2.500 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flat countersunk
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.534 inches minimum and 0.597 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Internal Drive Style
cross recess type 1
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Minimum Tensile Strength
70000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Countersink Angle
80.0 degrees minimum and 82.0 degrees maximum
Details
The included angle of the countersink.Nonmachine Nominal Thread Diameter
0.294 inches
Details
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.Material
steel comp 302 overall or steel comp 303 overall or steel comp 304 overall or steel comp 305 overall or steel comp 310 overall or steel comp 316 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-s-763 fed spec 1st material response overall or qq-w-423 fed spec 1st material response overall or qq-s-763 fed spec 2nd material response overall or qq-s-763 fed spec 3rd material response overall or qq-w-423 fed spec 3rd material response overall or qq-s-763 fed spec 4th material response overall or qq-s-763 fed spec 5th material response overall or qq-w-423 fed spec 5th material response overall or qq-s-763 fed spec 6th material response overall or qq-w-423 fed spec 6th material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | U |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 96906
FAQs
Frequently asked questions for NSN 5305-00-543-5410
What is the NIIN of the NSN 5305-00-543-5410?
The National Item Identification Number (NIIN) of the NSN 5305-00-543-5410 is 00-543-5410
When the NSN 5305-00-543-5410 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5305-00-543-5410 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-543-5410 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.