Shoulder Screw
13029292
(NSN) National Stock Number
5305-01-614-8507
Federal Supply Classification
5305 Screws
Item Name Code
22846
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.490 inches minimum and 0.590 inches maximum thread length, 1.090 inches minimum and 1.110 inches maximum fastener length, hexagon head style, 0.050 inches minimum and 0.060 inches maximum bottom countersink diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. No. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use screw, externally relieved body. For items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. Excludes:bolt, internal wrenching and screw, cap, socket head.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22846 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.490 inches minimum and 0.590 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
1.090 inches minimum and 1.110 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Bottom Countersink Diameter
0.050 inches minimum and 0.060 inches maximum
Details
None.Handle Length
0.470 inches minimum and 0.490 inches maximum
Details
A measurement of the longest dimension of the handle,in distinction from width.Handle Diameter
0.548 inches minimum and 0.550 inches maximum
Details
The length of a straight line which passes through the center of a circular handle,and terminates at the circumference.Head Height
0.320 inches minimum and 0.330 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Width Between Flats
0.740 inches minimum and 0.750 inches maximum
Details
None.Shoulder Diameter
0.548 inches minimum and 0.550 inches maximum all shoulders
Details
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.Shoulder Length
0.490 inches minimum and 0.590 inches maximum all shoulders
Details
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.End Item Identification
howitzer, light towed, 105mm, m119a1
Details
The national stock number or the identification information of the end equipment for which the item is a part.Width Across Flats
0.180 inches minimum and 0.181 inches maximum
Details
The shortest straight line between flats,perpendicular to the height.Thread Quantity Per Inch
13
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
125 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hardness Rating
36.0 rockwell c minimum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Minimum Yield Strength
109 pounds per square inch
Details
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.External Thread Tolerance Class
2a
Details
A numeric-alpha designator indicating established pitch and crest diameter tolerance positions and grades of an external thread.Shoulder Shape
round all shoulders
Details
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.Part Name Assigned By Controlling Agency
bolt, shoulder
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Special Features
drive hole is head 0.180-0.181 min-max diameter inch
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm a354, grade bc assn std single material response or astm a322 assn std single material response or astm a108 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
paint overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-std-171 mil std single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 50600 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE
CAGE: 19200
PICATINNY ARSENAL
, NJ
, 07806-5000
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-01-614-8507
What is the NIIN of the NSN 5305-01-614-8507?
The National Item Identification Number (NIIN) of the NSN 5305-01-614-8507 is 01-614-8507
When the NSN 5305-01-614-8507 was assigned to the Federal Catalog?
It was assigned 11 years ago, on Mon, Dec 17, 2012
Does the NSN 5305-01-614-8507 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-01-614-8507 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5305-01-614-8507?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.