Setscrew
4G13440-101A
(NSN) National Stock Number
5305-00-126-5740
Federal Supply Classification
5305 Screws
Item Name Code
06672
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.430 inches minimum and 0.450 inches maximum thread length, 0.830 inches minimum and 0.890 inches maximum fastener length, fillister head style, 0.700 inches minimum and 0.720 inches maximum head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. A locking feature may be incorporated in the design of the head or threads.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06672 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.430 inches minimum and 0.450 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
0.830 inches minimum and 0.890 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
fillister
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.700 inches minimum and 0.720 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.263 inches minimum and 0.283 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Hole Diameter
0.070 inches nominal
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Point Length
0.380 inches minimum and 0.460 inches maximum
Details
A measurement of the longest dimension of the point,in distinction from width.Point Diameter
0.245 inches minimum and 0.250 inches maximum
Details
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.Point Style
flat
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.Internal Drive Style
slot
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Nominal Thread Diameter
0.500 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Hole Quantity
1
Details
The number of holes provided.Hole Type
drilled
Details
Indicates the type of hole(s) provided in the item.Thread Quantity Per Inch
20
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
180000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Hole Configuration Style
round
Details
The style designation that most nearly corresponds to the appearance of the hole configuration.Point Chamfer Angle
90.0 degrees nominal
Details
None. replaced by mrc csyt with isac 0368.Material
steel comp 416f overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5610 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
LOCKHEED MARTIN CORP DIV LOCKHEED MARTIN AERONAUTICS COMPANY
CAGE: 98897
MARIETTA
, GA
, 30063-0001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-00-126-5740
What is the NIIN of the NSN 5305-00-126-5740?
The National Item Identification Number (NIIN) of the NSN 5305-00-126-5740 is 00-126-5740
When the NSN 5305-00-126-5740 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Fri, Dec 6, 1968
Does the NSN 5305-00-126-5740 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-00-126-5740 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.