Panel Screw Assembly
HMM-7900-M8-E-5
(NSN) National Stock Number
5305-01-134-2724
Federal Supply Classification
5305 Screws
Item Name Code
33044
Schedule B Code
7318152000
Summary
Right-hand thread direction, 11.6 millimeters minimum and 12.4 millimeters maximum thread length, 35.60 millimeters minimum and 36.40 millimeters maximum fastener length, flat chamfer head style, 12.6 millimeters minimum and 13.4 millimeters maximum head diameter, 7.6 millimeters minimum and 8.4 millimeters maximum head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 33044 | A003B0 | - | 1 |
Specifications
Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
11.6 millimeters minimum and 12.4 millimeters maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
35.60 millimeters minimum and 36.40 millimeters maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flat chamfer
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
12.6 millimeters minimum and 13.4 millimeters maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
7.6 millimeters minimum and 8.4 millimeters maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Material Accommodated Thickness
10.71 millimeters minimum and 11.51 millimeters maximum
Details
The thickness of the material to be accommodated.Nominal Thread Diameter
8.0 millimeters
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Pitch In Millimeters
1.25
Details
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.Material
steel comp 302 fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 304 stand-off
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 302 primary washer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
astm a493 assn std all material responses fastener
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-23195 mil spec single material response stand-off
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate fastener
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate primary washer
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate stand-off
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response fastener
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response primary washer
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response stand-off
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
m
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| PMS90402-010-03 | 18876 | 4 | - | 3 | 9 | - | KZ |
| HMM-7900-M8-E-5 | 97928 | 5 | - | 5 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION
CAGE: 0HDW7
TUCSON
, AZ
, 85714-3410
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-01-134-2724
What is the NIIN of the NSN 5305-01-134-2724?
The National Item Identification Number (NIIN) of the NSN 5305-01-134-2724 is 01-134-2724
When the NSN 5305-01-134-2724 was assigned to the Federal Catalog?
It was assigned 42 years ago, on Fri, Jul 2, 1982
Does the NSN 5305-01-134-2724 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-01-134-2724 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products