Panel Screw Assembly
FTD7258-10-16-15
(NSN) National Stock Number
5305-01-542-8808
Federal Supply Classification
5305 Screws
Item Name Code
33044
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.922 inches minimum and 0.952 inches maximum fastener length, flat countersunk head style, 0.280 inches minimum head diameter, torx internal drive style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 33044 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Fastener Length
0.922 inches minimum and 0.952 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flat countersunk
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.280 inches minimum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Internal Drive Style
torx
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.End Item Identification
f-22 raptor
Details
The national stock number or the identification information of the end equipment for which the item is a part.Material Accommodated Thickness
0.490 inches minimum and 0.510 inches maximum
Details
The thickness of the material to be accommodated.Nominal Thread Diameter
0.190 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
160000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Countersink Angle
99.0 degrees minimum and 101.0 degrees maximum
Details
The included angle of the countersink.Part Name Assigned By Controlling Agency
screw edm slot 100* reduced flat head six lobe recess
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Material
iron alloy 660 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams5731 assn std single material response overall or ams5737 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 assn std single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unjf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| - | - | - | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | - | - | - |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5305-01-542-8808
What is the NIIN of the NSN 5305-01-542-8808?
The National Item Identification Number (NIIN) of the NSN 5305-01-542-8808 is 01-542-8808
When the NSN 5305-01-542-8808 was assigned to the Federal Catalog?
It was assigned 18 years ago, on Tue, Aug 22, 2006
Does the NSN 5305-01-542-8808 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-01-542-8808 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.