Panel Screw Assembly

FCS9000S-08-3-B

(NSN) National Stock Number

5305-00-003-9479

Federal Supply Classification

5305 Screws

Item Name Code

33044

Schedule B Code

7318152000

Summary

3a thread class, right-hand thread direction, 0.475 inches minimum thread length, 0.505 inches minimum and 0.545 inches maximum fastener length, flat chamfer head style, 0.420 inches nominal head diameter

DAC	HCC	DMIL	RNCC
5	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	ZZ

Identification

A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.

INC	FIIG	Concept	Condition
33044	A003B0	-	1

Specifications

Thread Class

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction

right-hand

Details

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

Thread Length

0.475 inches minimum

Details

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

Fastener Length

0.505 inches minimum and 0.545 inches maximum

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

flat chamfer

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Head Diameter

0.420 inches nominal

Details

The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

Head Height

0.290 inches nominal

Details

A measurement from the bottom to the top of the head,in distinction from depth.

Material Accommodated Thickness

0.032 inches minimum and 0.093 inches maximum

Details

The thickness of the material to be accommodated.

Nominal Thread Diameter

0.164 inches

Details

The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

Thread Quantity Per Inch

Details

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Special Features

head vertically knurled

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Material

aluminum alloy 6061 head

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

aluminum alloy 6061 stand-off

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

steel comp 302 or steel comp 304 or steel comp 305 or steel comp 316 or steel comp 321 or steel comp 347 or steel comp 384 or steel comp 385 fastener

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

steel comp 302 spring

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

astm a493 assn std all material responses fastener

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

qq-a-225/8 temper t6 fed spec single material response head

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

qq-a-225/8 temper t6 fed spec single material response stand-off

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

qq-w-423 cond b fed spec single material response spring

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Surface Treatment

anodize head

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment

anodize stand-off

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment

passivate fastener

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment

passivate spring

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

mil-a-8625 ty 1 cl 1 mil spec single treatment response head

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Surface Treatment Document And Classification

mil-a-8625 ty 1 cl 1 mil spec single treatment response stand-off

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Surface Treatment Document And Classification

qq-p-35 fed spec single treatment response fastener

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Surface Treatment Document And Classification

qq-p-35 fed spec single treatment response spring

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Thread Series Designator

unc

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
1080H80H09	D9182	6	-	C	1	-	ZZ
1081H03H07	D9182	6	-	C	1	-	ZZ
1081H04H05	D9182	6	-	C	1	-	ZZ
1081H05H53	D9182	6	-	C	1	-	ZZ
1081H06H07	D9182	6	-	C	1	-	ZZ
1081H07H07	D9182	6	-	C	1	-	ZZ
1081H08H13	D9182	6	-	C	1	-	ZZ
1081H09H32	D9182	6	-	C	1	-	ZZ
1081H10H05	D9182	6	-	C	1	-	ZZ
1081H11H06	D9182	6	-	C	1	-	ZZ
1081H12H39	D9182	6	-	C	1	-	ZZ
1081H13H31	D9182	6	-	C	1	-	ZZ
1081H15H06	D9182	6	-	C	1	-	ZZ
1081H26H09	D9182	6	-	C	1	-	ZZ
1081H27H09	D9182	6	-	C	1	-	ZZ
1081H28H09	D9182	6	-	C	1	-	ZZ
1081H29H09	D9182	6	-	C	1	-	ZZ
1081H30H09	D9182	6	-	C	1	-	ZZ
1081H31H09	D9182	6	-	C	1	-	ZZ
1081H32H09	D9182	6	-	C	1	-	ZZ
1081H33H09	D9182	6	-	C	1	-	ZZ
1081H34H09	D9182	6	-	C	1	-	ZZ
1081H35H09	D9182	6	-	C	1	-	ZZ
1081H36H09	D9182	6	-	C	1	-	ZZ
1081H37H09	D9182	6	-	C	1	-	ZZ
1081H39H09	D9182	6	-	C	1	-	ZZ
1081H40H09	D9182	6	-	C	1	-	ZZ
1081H41H09	D9182	6	-	C	1	-	ZZ
1081H42H09	D9182	6	-	C	1	-	ZZ
1081H96H06	D9182	6	-	C	1	-	ZZ
1082H35H23	D9182	6	-	C	1	-	ZZ
1082H36H07	D9182	6	-	C	1	-	ZZ
F7500-8-B-3	0HDW7	1	-	5	2	-	ZZ
720213-26	05869	1	-	7	2	-	KZ
720213-26	92215	5	-	5	9	-	ZZ
28C806-001	04660	5	-	5	9	-	KE
1000-1423-003	15280	5	-	5	9	-	ZZ
F7500-8B3	97928	4	-	5	9	-	KE
F75008B3	97928	1	-	5	9	-	TU
1080H89PC6	04804	6	-	C	1	-	ZZ
1080H90PC6	04804	6	-	C	1	-	ZZ
1080H92PC9	04804	6	-	C	1	-	ZZ
1081H45PC9	04804	6	-	C	1	-	ZZ
1081H46PC9	04804	6	-	C	1	-	ZZ
1081H47PC9	04804	6	-	C	1	-	ZZ
1081H48PC9	04804	6	-	C	1	-	ZZ
1081H49PC9	04804	6	-	C	1	-	ZZ
1081H50PC9	04804	6	-	C	1	-	ZZ
1081H51PC9	04804	6	-	C	1	-	ZZ
1081H75PC6	04804	6	-	C	1	-	ZZ
1081H76PC11	04804	6	-	C	1	-	ZZ
1081H77PC6	04804	6	-	C	1	-	ZZ
1081H91PC7	04804	6	-	C	1	-	ZZ
8320001770	88818	5	-	5	9	-	ZZ
B320001770	88818	1	-	5	2	-	SE
720213-26	56878	5	-	5	9	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
50270	-	U	-

RVC	WCC	TCC	SHC
-	713	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Genuine Manufacturers Parts
100% Product Inspection
7 Year Sales Record Retention
Fast On-Time Delivery
HAZMAT Certified
Global Shipping

Manufacturer

FASTENER INNOVATION TECHNOLOGY, INC. DBA F I T

CAGE: 58998

COMPTON , CA , 90221-5711

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5305-00-003-9479

What is the NIIN of the NSN 5305-00-003-9479?

The National Item Identification Number (NIIN) of the NSN 5305-00-003-9479 is 00-003-9479

When the NSN 5305-00-003-9479 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Sun, May 21, 1972

Does the NSN 5305-00-003-9479 contain any precious metals?

Type/content is unknown

Does the NSN 5305-00-003-9479 contain any hazardous material?

No data in HMIRS

Can't Find It