Panel Screw Assembly
DMG7900-6-A-3
(NSN) National Stock Number
5305-01-114-9802
Federal Supply Classification
5305 Screws
Item Name Code
33044
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.188 inches minimum and 0.218 inches maximum thread length, 0.485 inches minimum and 0.515 inches maximum fastener length, pan head style, 0.298 inches minimum and 0.328 inches maximum head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | 9F | - | ZZ |
Identification
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 33044 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.188 inches minimum and 0.218 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
0.485 inches minimum and 0.515 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
pan
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.298 inches minimum and 0.328 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.105 inches minimum and 0.115 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Material Accommodated Thickness
0.020 inches minimum and 0.030 inches maximum
Details
The thickness of the material to be accommodated.Nominal Thread Diameter
0.138 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Hardness Rating
34.0 rockwell c minimum overall and 38.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Material
copper alloy 360 stand-off
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 302 spring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 4037 fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6300 assn std single material response fastener
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-b-626 fed spec single material response stand-off
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-w-423 cond b fed spec single material response spring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium fastener and chromate fastener
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
cadmium spring and chromate spring
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416 type 2 class 2 fed spec single treatment response spring
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-416 type 2 class 2 fed spec single treatment response fastener
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Fsc Application Data
bracket fuel drain
Details
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 4011531-001 | 07187 | A | - | 7 | 2 | - | KZ |
| 4011531-001-3 | 58998 | 5 | - | 5 | 2 | - | ZZ |
| FT1016-06-1-2 | 58794 | A | - | 5 | 2 | - | KZ |
| DMG7900-6-A-3 | 97928 | A | - | 3 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION
CAGE: 0HDW7
TUCSON
, AZ
, 85714-3410
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-01-114-9802
What is the NIIN of the NSN 5305-01-114-9802?
The National Item Identification Number (NIIN) of the NSN 5305-01-114-9802 is 01-114-9802
When the NSN 5305-01-114-9802 was assigned to the Federal Catalog?
It was assigned 43 years ago, on Thu, Jun 25, 1981
Does the NSN 5305-01-114-9802 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-01-114-9802 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products