Machine Screw
MS35275-259
(NSN) National Stock Number
5305-00-006-8141
Federal Supply Classification
5305 Screws
Item Name Code
06657
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.136 inches minimum and 0.250 inches maximum thread length, 0.219 inches minimum and 0.250 inches maximum fastener length, fillister head style, 0.292 inches minimum and 0.313 inches maximum head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | ZZ |
Identification
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes:bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06657 | A500D0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.136 inches minimum and 0.250 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
0.219 inches minimum and 0.250 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
fillister
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.292 inches minimum and 0.313 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.123 inches minimum and 0.130 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Hole Diameter
0.046 inches nominal
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Internal Drive Style
slot
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Nominal Thread Diameter
0.190 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Hole Quantity
1
Details
The number of holes provided.Thread Quantity Per Inch
24
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
80000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Screw Material
steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316
Details
The chemical compound or mechanical mixture properties of which the screw is fabricated.Screw Material Document And Classification
66 fed std all material responses
Details
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the screw material.Screw Surface Treatment
passivate
Details
The metallic,nonmetallic,and/or chemical properties with which the screw is plated,dipped and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Screw Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material of the screw.Head Hole Configuration Style
round
Details
The style designation that most nearly corresponds to the appearance of the hole configuration in the head.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Nondefinitive Spec/Std Data
1 type and 5s style
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Departure From Cited Designator
material must conform to ships parts control center special quality control provisions
Details
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| FFS92 | 81348 | 4 | - | 4 | 1 | - | KZ |
| MS35275-259 | 80205 | E | - | 3 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 63220 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72E | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 96906
FAQs
Frequently asked questions for NSN 5305-00-006-8141
What is the NIIN of the NSN 5305-00-006-8141?
The National Item Identification Number (NIIN) of the NSN 5305-00-006-8141 is 00-006-8141
When the NSN 5305-00-006-8141 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jun 28, 1972
Does the NSN 5305-00-006-8141 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-006-8141 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products