Drive Screw
611B396-02
(NSN) National Stock Number
5305-01-412-4531
Federal Supply Classification
5305 Screws
Item Name Code
15896
Schedule B Code
7318152000
Summary
0.266 inches minimum and 0.334 inches maximum fastener length, round head style, 0.240 inches minimum and 0.260 inches maximum head diameter, 0.035 inches minimum and 0.040 inches maximum head height, 0.112 inches minimum and 0.116 inches maximum pilot diameter, 0.047 inches nominal pilot length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | ZZ |
Identification
A hardened cylindrical fastener with multiple spiral flutes on its shank. It also has an end smaller in diameter than the outside diameter of the spiral flutes, which acts as a pilot when driven into a drilled hole.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15896 | A003B0 | - | 1 |
Specifications
Fastener Length
0.266 inches minimum and 0.334 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.240 inches minimum and 0.260 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.035 inches minimum and 0.040 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Pilot Diameter
0.112 inches minimum and 0.116 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Pilot Length
0.047 inches nominal
Details
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.Features Provided
casehardened
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Nonmachine Thread Style
drive screw (type u)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.Criticality Code Justification
zzzy
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Nonmachine Nominal Thread Diameter
0.138 inches
Details
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall and chromate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Surface Treatment Document And Classification
qq-p-416 ty 2 cl 3 fed spec all treatment responses overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Reference Number Differentiating Characteristics
as differentiated by material which must conform to ships parts control center special quality control provisions
Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| LL-HX9-3037 | 14153 | 9 | - | 5 | 9 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
WESTINGHOUSE ELECTRIC CORP GENERAL CONTROL DIV
CAGE: 88725
ASHEVILLE
, NC
, 28813-5715
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-01-412-4531
What is the NIIN of the NSN 5305-01-412-4531?
The National Item Identification Number (NIIN) of the NSN 5305-01-412-4531 is 01-412-4531
When the NSN 5305-01-412-4531 was assigned to the Federal Catalog?
It was assigned 29 years ago, on Wed, Apr 19, 1995
Does the NSN 5305-01-412-4531 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-01-412-4531 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products