Drive Screw
12387333-58
(NSN) National Stock Number
5305-01-383-6116
Federal Supply Classification
5305 Screws
Item Name Code
15896
Schedule B Code
7318152000
Summary
0.594 inches minimum and 0.656 inches maximum fastener length, round head style, 0.236 inches minimum and 0.242 inches maximum head diameter, 0.155 inches minimum and 0.170 inches maximum head height, 0.198 inches minimum and 0.202 inches maximum pilot diameter, 0.078 inches nominal pilot length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A hardened cylindrical fastener with multiple spiral flutes on its shank. It also has an end smaller in diameter than the outside diameter of the spiral flutes, which acts as a pilot when driven into a drilled hole.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15896 | A003B0 | - | 1 |
Specifications
Fastener Length
0.594 inches minimum and 0.656 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.236 inches minimum and 0.242 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.155 inches minimum and 0.170 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Pilot Diameter
0.198 inches minimum and 0.202 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Pilot Length
0.078 inches nominal
Details
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.Features Provided
casehardened
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Nonmachine Thread Style
drive screw (type u)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.Nonmachine Nominal Thread Diameter
0.239 inches
Details
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.Special Features
protective finish 1.9.2.3 of mil-std-171, except .0003 thick.
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Color
bronze overall or olive drab overall
Details
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.Material
steel comp 1016 overall or steel comp 1018 overall or steel comp 1019 overall or steel comp 1021 overall or steel comp 1022 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
aisi 1016 assn std 1st material response overall or aisi 1018 assn std 2nd material response overall or aisi 1019 assn std 3rd material response overall or aisi 1021 assn std 4th material response overall or aisi 1022 assn std 5th material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
zinc overall and chromate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
astm b633, type ii assn std single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
CAGE: 19207
WARREN
, MI
, 48397
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-01-383-6116
What is the NIIN of the NSN 5305-01-383-6116?
The National Item Identification Number (NIIN) of the NSN 5305-01-383-6116 is 01-383-6116
When the NSN 5305-01-383-6116 was assigned to the Federal Catalog?
It was assigned 30 years ago, on Fri, Nov 26, 1993
Does the NSN 5305-01-383-6116 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-01-383-6116 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.