Close Tolerance Screw
HT74028L8-7
3a thread class, right-hand thread direction, 0.756 inches minimum and 0.806 inches maximum thread length, 1.204 inches minimum and 1.234 inches maximum fastener length, oval countersunk head style, 0.747 inches minimum and 0.753 inches maximum head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 29294 | A003B0 | - | 1 |
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Details
The length of a straight line which passes through the center of the grip,and terminates at the circumference.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Details
A measurement of the longest dimension of the grip,in distinction from width.Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Details
The included angle of the countersink.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| HT4028L8-7 | L4528 | 4 | - | 3 | 2 | - | ZZ |
| ST3M466V8L7-1 | K5673 | 5 | - | 5 | 2 | - | ZZ |
| 11909V8L7-1 | 59563 | 5 | - | 5 | 2 | - | ZZ |
| HT4028L8-7 | 17446 | 5 | - | 3 | 2 | - | ZZ |
| HT4028L8-7 | 80539 | 4 | - | 3 | 2 | - | SB |
| ST3M466V8L7-1 | 007R1 | 5 | - | 5 | 2 | - | ZZ |
| HT4028L8-7 | 73197 | 4 | - | 3 | 2 | - | SB |
| HT4028L8-7 | 92215 | 4 | - | 5 | 9 | - | SB |
| ST3M466V8L7-1 | 92215 | 5 | - | 5 | 9 | - | ZZ |
| HT4028L8-7 | 97928 | 4 | - | 5 | 9 | - | SB |
| ST3M466V8L7-1 | 76301 | 2 | - | 7 | 2 | - | SB |
| ST3M466V8L7-1 | 56878 | 5 | - | 3 | 2 | - | ZZ |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 68455 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
What is the NIIN of the NSN 5305-00-310-6421?
When the NSN 5305-00-310-6421 was assigned to the Federal Catalog?
Does the NSN 5305-00-310-6421 contain any precious metals?
Does the NSN 5305-00-310-6421 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.