Pin-Rivet

T890-6

(NSN) National Stock Number

5320-00-047-4400

Federal Supply Classification

5320 Rivets

Item Name Code

67165

Schedule B Code

8108908000

Summary

3a thread class, right-hand thread direction, 0.775 inches minimum and 0.795 inches maximum fastener length, flush countersunk head style, 0.079 inches minimum and 0.081 inches maximum width between flats, 0.194 inches minimum and 0.195 inches maximum shank diameter

DAC	HCC	DMIL	RNCC
5	-	-	C

RNVC	SADC	MSDS	RNAAC
1	9F	-	ZZ

Identification

A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.

INC	FIIG	Concept	Condition
67165	A528U0	-	1

Specifications

Thread Class

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction

right-hand

Details

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

Fastener Length

0.775 inches minimum and 0.795 inches maximum

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

flush countersunk

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Width Between Flats

0.079 inches minimum and 0.081 inches maximum

Details

None.

Shank Diameter

0.194 inches minimum and 0.195 inches maximum

Details

The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

Shank Style

pin-rivet, straight, threaded

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

Head Major Diameter

0.297 inches minimum and 0.302 inches maximum

Details

None.

Grip Length

0.385 inches maximum

Details

A measurement of the longest dimension of the grip,in distinction from width.

Thread Quantity Per Inch

Details

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Nominal Thread Size

0.190 inches

Details

A designation that is used for the purpose of general identification of the thread.

Shear Strength

95000 single pounds per square inch

Details

The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

Countersink Angle

100.0 degrees nominal

Details

The included angle of the countersink.

Special Features

solid film and cetyl alcohol lubrication

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Material

titanium alloy overall

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

ams 4928 assn std single material response overall or ams 4967 assn std single material response overall

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Surface Treatment

anodize overall

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

ti-shield 3,fscm 73197 mfr ref single treatment response overall or tiodize ty 2,fscm 73197 mfr ref single treatment response overall

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Thread Series Designator

unjf

Details

A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
HLT341TL6-6	L4528	5	-	5	2	-	ZZ
HLT341TL6-6	17446	5	-	5	2	-	ZZ
HLT341TL6-6	73197	5	-	3	2	-	KE
HLT341TL6-6	92215	5	-	5	2	-	KE
BM19057-3-6	97928	5	-	C	1	-	KE
BM19057-6	97928	A	-	5	9	-	KZ
T890-6	97928	A	-	5	9	-	KZ
GB510AA3-6	26512	5	-	7	2	-	KE
HLT341TL6-6	56878	5	-	5	2	-	KE
HLT341TL6-6	50392	5	-	5	9	-	KE

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
05380	-	W	-

RVC	WCC	TCC	SHC
-	713	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Genuine Manufacturers Parts
100% Product Inspection
7 Year Sales Record Retention
Fast On-Time Delivery
HAZMAT Certified
Global Shipping

Manufacturer

HUCK INTERNATIONAL, INC

CAGE: 17446

CARSON , CA , 90745-4201

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5320-00-047-4400

What is the NIIN of the NSN 5320-00-047-4400?

The National Item Identification Number (NIIN) of the NSN 5320-00-047-4400 is 00-047-4400

When the NSN 5320-00-047-4400 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Fri, Nov 17, 1972

Does the NSN 5320-00-047-4400 contain any precious metals?

Type/content is unknown

Does the NSN 5320-00-047-4400 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.