Rivets » Pin-rivets

Page 1 of 548
665423 SKU 5320000011756
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.573 inches and 0.593 inches
  • Head Style: Belt
  • Width Between Flats: Between 0.095 inches and 0.097 inches
HL328-6-8 SKU 5320000015176
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.815 inches and 0.835 inches
  • Head Height: Between 0.045 inches and 0.055 inches
  • Width Between Flats: Between 0.079 inches and 0.081 inches
HL325-6-4 SKU 5320000015177
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.565 inches and 0.585 inches
  • Head Style: Flush countersunk
  • Shank Style: Pin-rivet, straight, threaded
ASPFF-DT08-13 SKU 5320000015178
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.842 inches and 0.862 inches
  • Head Style: Flush countersunk
  • Width Between Flats: 0.094 inches
HL12V-5-2 SKU 5320000018276
HS92-4-5 SKU 5320000019138
  • Head Height: Between 0.029 inches and 0.039 inches
  • Head Major Diameter: Between 0.188 inches and 0.208 inches
  • Grip Length: 0.312 inches
  • Shear Strength: 95000 single pounds per square inch
  • Heat Treatment: As fabricated
HL10VAP-5-5 SKU 5320000019943
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.614 inches and 0.634 inches
  • Head Height: Between 0.037 inches and 0.047 inches
  • Width Between Flats: Between 0.064 inches and 0.065 inches
2LPY-DT06-04 SKU 5320000030725
  • Head Height: Between 0.099 inches and 0.111 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.297 inches and 0.327 inches
  • Grip Length: 0.250 inches
  • Surface Treatment: Cadmium
BACB30DX6-7 SKU 5320000030726
  • Head Height: Between 0.099 inches and 0.111 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.297 inches and 0.327 inches
  • Grip Length: 0.438 inches
  • Surface Treatment: Cadmium and chromate
2LPY-DT06-09 SKU 5320000030727
  • Head Height: Between 0.099 inches and 0.111 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.297 inches and 0.327 inches
  • Grip Length: 0.562 inches
  • Surface Treatment: Cadmium
HL910-6-2 SKU 5320000036951
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.440 inches and 0.460 inches
  • Head Height: Between 0.045 inches and 0.055 inches
  • Width Between Flats: Between 0.079 inches and 0.081 inches
HL911-10-6 SKU 5320000036952
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.865 inches and 0.885 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.127 inches and 0.130 inches
HL2086TW5-12 SKU 5320000038011
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 1.052 inches and 1.072 inches
  • Head Height: Between 0.055 inches and 0.060 inches
  • Width Between Flats: 0.078 inches
HL2086TW5-13 SKU 5320000038012
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Width Between Flats: 0.0780 inches
  • Shank Style: Pin-rivet, straight, threaded
  • Features Provided: Washer
HL2086TW5-7 SKU 5320000038013
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.740 inches and 0.760 inches
  • Head Height: Between 0.055 inches and 0.060 inches
  • Width Between Flats: 0.078 inches
HL2086TW5-9 SKU 5320000038014
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Width Between Flats: 0.0780 inches
  • Shank Style: Pin-rivet, straight, threaded
  • Features Provided: Washer
NAS1466N05 SKU 5320000038026
  • Fastener Length: Between 1.810 inches and 2.010 inches
  • Head Height: Between 0.099 inches and 0.111 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.297 inches and 0.327 inches
  • Grip Length: Between 0.282 inches and 0.344 inches
NAS1466N06 SKU 5320000038027
  • Fastener Length: Between 1.940 inches and 2.140 inches
  • Head Height: Between 0.099 inches and 0.111 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.297 inches and 0.327 inches
  • Grip Length: Between 0.345 inches and 0.406 inches
NAS1466N07 SKU 5320000038028
  • Fastener Length: Between 2.060 inches and 2.260 inches
  • Head Height: Between 0.099 inches and 0.111 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.297 inches and 0.327 inches
  • Grip Length: Between 0.407 inches and 0.469 inches
NAS1556-15 SKU 5320000038030
  • Fastener Length: Between 1.253 inches and 1.273 inches
  • Head Height: Between 0.078 inches and 0.088 inches
  • Shank Style: Stump
  • Head Major Diameter: Between 0.302 inches and 0.317 inches
  • Grip Length: Between 0.907 inches and 0.969 inches
HL21-6-5 SKU 5320000042166
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.627 inches and 0.647 inches
  • Head Style: Flush countersunk
  • Shank Style: Pin-rivet, straight, threaded
HL962-6-6 SKU 5320000043531
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.690 inches and 0.710 inches
  • Head Height: Between 0.045 inches and 0.055 inches
  • Shank Style: Pin-rivet, straight, threaded
HL20-8-9 SKU 5320000044036
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.947 inches and 0.967 inches
  • Head Height: Between 0.077 inches and 0.090 inches
  • Shank Style: Pin-rivet, straight, threaded
HL814-10-17 SKU 5320000047325
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 1.432 inches and 1.452 inches
  • Head Height: Between 0.068 inches and 0.078 inches
  • Width Between Flats: Between 0.127 inches and 0.130 inches
HL54-10-21 SKU 5320000050946
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 1.682 inches and 1.702 inches
  • Head Height: Between 0.068 inches and 0.078 inches
  • Width Between Flats: Between 0.127 inches and 0.130 inches
9051M66P01 SKU 5320000051620
  • Thread Class: 1A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.690 inches and 0.710 inches
  • Head Height: Between 0.070 inches and 0.090 inches
  • Shank Diameter: 0.3125 inches
HL20-6-4 SKU 5320000053541
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.565 inches and 0.585 inches
  • Head Height: Between 0.064 inches and 0.074 inches
  • Shank Style: Pin-rivet, straight, threaded
HL21-10-13 SKU 5320000053542
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 1.302 inches and 1.322 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.127 inches and 0.129 inches
HL30-12-12 SKU 5320000056243
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 1.285 inches and 1.305 inches
  • Head Height: Between 0.078 inches and 0.088 inches
  • Width Between Flats: Between 0.158 inches and 0.162 inches
3186955 SKU 5320000056396
  • Head Style: Flush countersunk
  • Grip Length: 1.875 inches
  • Min. Tensile Strength (psi): 160000 pounds per square inch
  • Countersink Angle: 100.0 degrees
202-17001-10-13 SKU 5320000058367
9051M66P03 SKU 5320000060954
  • Thread Class: 1A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.490 inches and 0.510 inches
  • Head Height: Between 0.070 inches and 0.090 inches
  • Shank Diameter: 0.3125 inches
9051M65P01 SKU 5320000060955
  • Thread Class: 1A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.420 inches and 0.450 inches
  • Head Style: Straight pan
  • Head Height: Between 0.040 inches and 0.050 inches
HL54-8-21 SKU 5320000064940
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 1.697 inches and 1.717 inches
  • Head Height: Between 0.059 inches and 0.069 inches
  • Width Between Flats: Between 0.095 inches and 0.097 inches
HL64-10-10 SKU 5320000068435
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 1.115 inches and 1.135 inches
  • Head Height: Between 0.098 inches and 0.112 inches
  • Width Between Flats: Between 0.127 inches and 0.130 inches
0KS200-DT08-07 SKU 5320000068646
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.741 inches and 0.764 inches
  • Head Style: Crown countersunk greater than 135 degrees
  • Width Between Flats: 0.094 inches
HL65PB-6-8 SKU 5320000070336
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.815 inches and 0.835 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.079 inches and 0.081 inches
HL64PB8-14 SKU 5320000070337
GB510W6-9 SKU 5320000070397
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 1.097 inches and 1.117 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.158 inches and 0.162 inches
3M247C08-4 SKU 5320000073325
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.582 inches and 0.602 inches
  • Head Height: Between 0.037 inches and 0.047 inches
  • Width Between Flats: Between 0.079 inches and 0.080 inches
H1448-10 SKU 5320000078825
  • Head Height: Between 0.074 inches and 0.081 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.363 inches and 0.377 inches
  • Grip Length: Between 0.563 inches and 0.625 inches
  • Min. Tensile Strength (psi): 160000 pounds per square inch
NAS1448H11 SKU 5320000078826
  • Head Height: Between 0.074 inches and 0.081 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.363 inches and 0.377 inches
  • Grip Length: Between 0.626 inches and 0.688 inches
  • Min. Tensile Strength (psi): 160000 pounds per square inch
H1448-12 SKU 5320000078827
  • Head Height: Between 0.074 inches and 0.081 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.363 inches and 0.377 inches
  • Grip Length: Between 0.689 inches and 0.750 inches
  • Min. Tensile Strength (psi): 160000 pounds per square inch
NAS1448H13 SKU 5320000078828
  • Head Height: Between 0.074 inches and 0.081 inches
  • Shank Style: Pin-rivet, multiple grooved
  • Head Major Diameter: Between 0.363 inches and 0.377 inches
  • Lubrication: Settle alcohol
  • Grip Length: Between 0.751 inches and 0.812 inches
HL325-5-5 SKU 5320000079956
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: Between 0.614 inches and 0.634 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.064 inches and 0.065 inches
HS23-5-13 SKU 5320000083725
  • Head Style: Flush countersunk
  • Shank Diameter: Between 0.155 inches and 0.156 inches
  • Head Major Diameter: Between 0.249 inches and 0.254 inches
  • Grip Length: 0.812 inches
  • Countersink Angle: 100.0 degrees
HL559-8-10 SKU 5320000089317
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: 1.110 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.095 inches and 0.097 inches
HL559-8-12 SKU 5320000089319
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: 1.235 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.095 inches and 0.097 inches
HL559-6-12 SKU 5320000089324
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: 1.165 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.079 inches and 0.081 inches
H559-6-13 SKU 5320000089325
  • Thread Class: 3A
  • Thread Direction: Right-hand
  • Fastener Length: 1.202 inches
  • Head Style: Flush countersunk
  • Width Between Flats: Between 0.079 inches and 0.081 inches