Blind Rivet
NAS1673-08L8
(NSN) National Stock Number
5320-00-063-9965
Federal Supply Classification
5320 Rivets
Item Name Code
00864
Schedule B Code
7318230000
Summary
0.590 inches minimum and 0.620 inches maximum fastener length, hexagon head style, 0.086 inches minimum and 0.096 inches maximum head height, 0.163 inches minimum and 0.165 inches maximum shank diameter, threaded self-plugging shank w/sleeve shank style, serrated stem-type w expansion device
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00864 | A040A0 | - | 1 |
Specifications
Fastener Length
0.590 inches minimum and 0.620 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
hexagon
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Height
0.086 inches minimum and 0.096 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Shank Diameter
0.163 inches minimum and 0.165 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
threaded self-plugging shank w/sleeve
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Expansion Device
serrated stem-type w
Details
The device by which the item is expanded and set.Lubrication
dry film or wax
Details
A substance designed to provide a reduction of friction between the two surfaces in contact.Grip Length
0.469 inches minimum and 0.531 inches maximum
Details
A measurement of the longest dimension of the grip,in distinction from width.Width Across Flats
0.277 inches minimum and 0.283 inches maximum
Details
The shortest straight line between flats,perpendicular to the height.Shear Strength
1920 double pounds per square inch
Details
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.Special Features
heat process mil-h-6088
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Heat Treatment
annealed overall
Details
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.Material
aluminum alloy 7075 body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 303f sleeve
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 4130 stem or steel comp 8740 stem or steel comp 4140 stem
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5641 assn std single material response sleeve
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
mil-s-6758 mil spec 1st material response stem or mil-s-6049 mil spec 2nd material response stem or mil-s-5626 mil spec 3rd material response stem
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-282 fed spec single material response body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize body
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
cadmium sleeve
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
cadmium stem
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625,ty 2 mil spec single treatment response body
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-416,ty 2,cl 3 fed spec single treatment response stem
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-416,ty 1,cl 3 fed spec single treatment response sleeve
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| PPA164-8 | 92541 | 4 | - | 5 | 9 | - | KZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 54760 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
CAGE: 80205
ARLINGTON
, VA
, 22209
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5320-00-063-9965
What is the NIIN of the NSN 5320-00-063-9965?
The National Item Identification Number (NIIN) of the NSN 5320-00-063-9965 is 00-063-9965
When the NSN 5320-00-063-9965 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5320-00-063-9965 contain any precious metals?
Type/content is unknown
Does the NSN 5320-00-063-9965 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products