Valve Seat
663956-1
(NSN) National Stock Number
4810-00-016-1042
Federal Supply Classification
4810 Powered Valves
Item Name Code
22113
Schedule B Code
8481909090
Summary
1.242 inches minimum and 1.246 inches maximum flange diameter, 0.803 inches minimum and 0.813 inches maximum overall height, 0.220 inches minimum and 0.260 inches maximum taper length, 0.330 inches minimum and 0.340 inches maximum taper minor diameter, 0.489 inches minimum and 0.495 inches maximum taper major diameter, grooved seal accommodation type
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
A replaceable item designed to provide a stationary seating surface for a mating, moveable item such as a valve disk or the like. The body may have a flange of various shapes. For diesel and gasoline reciprocating engines, see insert, engine valve seat.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22113 | A15500 | - | 2 |
Specifications
Flange Diameter
1.242 inches minimum and 1.246 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Overall Height
0.803 inches minimum and 0.813 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Taper Length
0.220 inches minimum and 0.260 inches maximum
Details
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.Taper Minor Diameter
0.330 inches minimum and 0.340 inches maximum
Details
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.Taper Major Diameter
0.489 inches minimum and 0.495 inches maximum
Details
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.Seal Accommodation Type
grooved
Details
Indicates the type of seal accommodation included in or on the item.Hardness Rating
52.0 rockwell b minimum and 56.0 rockwell b maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Criticality Code Justification
test
Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Material
steel corrosion resisting overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-7720,comp 303,cond b mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
nickel overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Test Data Document
99193-663956 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Fsc Application Data
solenoid valve
Details
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 663956-2 | 99193 | 2 | - | 5 | 9 | - | SB |
| 663956-2 | 59364 | 2 | - | 5 | 9 | - | SB |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 29300 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 576 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - PHOENIX
CAGE: 99193
PHOENIX
, AZ
, 85034-2802
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 4810-00-016-1042
What is the NIIN of the NSN 4810-00-016-1042?
The National Item Identification Number (NIIN) of the NSN 4810-00-016-1042 is 00-016-1042
When the NSN 4810-00-016-1042 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 4810-00-016-1042 contain any precious metals?
Does not contain precious metal
Does the NSN 4810-00-016-1042 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products