Solenoid Valve

D5-19-5172

D5-19-5172
(NSN) National Stock Number
4810-00-004-0727
Federal Supply Classification
4810 Powered Valves
Item Name Code
10998
Schedule B Code
8481809005
Summary

Right-hand 1st end thread direction, diaphragm flow control device, open flow control device normal operation position, plain,optional end(pipe) 1st end connection style, 0.470 current rating in amps, solenoid valve operation method

DAC HCC DMIL RNCC
1 - - 3
RNVC SADC MSDS RNAAC
2 - - BF
Identification

A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes:valve (1), butterfly.

INC FIIG Concept Condition
10998 A046B0 1 1
Specifications
Thread Direction
right-hand 1st end
Details The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
Flow Control Device
diaphragm
Details The part that controls the flow through the item.
Flow Control Device Normal Operation Position
open
Details The position of the moving member/s/ controlling flow through the valve with the solenoid in the de-energized position.
Connection Style
plain,optional end(pipe) 1st end
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
Current Rating In Amps
0.470
Details The electrical current rating,expressed in amperes.
Valve Operation Method
solenoid
Details The means used to control the operation of the valve.
Connection Type
threaded internal pipe 1st end
Details Indicates the type of connection/s/.
Mounting Position
horizontal or vertical
Details The installed position for which the item is designed.
Inlet/Outlet Operating Pressure Differential
15.0 pounds per square inch nominal
Details The difference,at the rated temperature,between the inlet and outlet pressure for positive operation.
Nominal Thread Size
2.000 inches 1st end
Details A designation that is used for the purpose of general identification of the thread.
Voltage In Volts And Current Type
26.0 dc
Details The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.
Special Features
w/connector,plug,electrical,ms3101f12s3p attached
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Material
aluminum body
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material
aluminum flow control device
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Special Test Features
fungus and moisture proof,organism group ii
Details Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
Style Designator
straight thru
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Test Data Document
81349-mil-e-5272 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
Thread Series Designator
npt 1st end
Details A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
8215A84 04845 4 - 5 1 - BF
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
29300 - W P
RVC WCC TCC SHC
1 736 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
EDGEWOOD CHEMICAL BIOLOGICAL CENTER ECBC
CAGE: 81361
GUNPOWDER , MD , 21010-5424
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 4810-00-004-0727
What is the NIIN of the NSN 4810-00-004-0727?
The National Item Identification Number (NIIN) of the NSN 4810-00-004-0727 is 00-004-0727
When the NSN 4810-00-004-0727 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Sat, May 27, 1972
Does the NSN 4810-00-004-0727 contain any precious metals?
Does not contain precious metal
Does the NSN 4810-00-004-0727 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA