Wing Plain Nut
FF-N-845
(NSN) National Stock Number
5310-01-007-7077
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
01862
Schedule B Code
7318160000
Summary
2b thread class, right-hand thread direction, forged fabrication method, 0.960 inches minimum and 1.100 inches maximum wing spread width, 0.430 inches minimum and 0.570 inches maximum overall height, 0.450 inches minimum and 0.500 inches maximum body diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 4 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | HX |
Identification
A nut having wings designed for manual turning without driver or wrench.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 01862 | A021A0 | 1 | 1 |
Specifications
Thread Class
2b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Fabrication Method
forged
Details
The process used in manufacturing the item.Wing Spread Width
0.960 inches minimum and 1.100 inches maximum
Details
None.Overall Height
0.430 inches minimum and 0.570 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Body Diameter
0.450 inches minimum and 0.500 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Nut Style
wing
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Drilled Hole Diameter
0.070 inches nominal
Details
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.Hole Type And Quantity
1 drilled
Details
Indicates the type and number of holes provided.Thread Series
unc
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
20
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.250 inches
Details
A designation that is used for the purpose of general identification of the thread.Hole Configuration Style
configuration k
Details
The style designation that most nearly corresponds to the appearance of the hole configuration.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Surface Treatment Document And Classification
qq-p-416,ty 2,cl 3 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Nondefinitive Spec/Std Data
a type and 2 style
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Departure From Cited Designator
as mod by material which must conform to ships parts control center special quality control provisions
Details
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| MS35425-39 | 96906 | 4 | - | 4 | 1 | - | HX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
CAGE: 81348
NATL INSTITUTE STDS & TECH
, MD
, 20899
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-01-007-7077
What is the NIIN of the NSN 5310-01-007-7077?
The National Item Identification Number (NIIN) of the NSN 5310-01-007-7077 is 01-007-7077
When the NSN 5310-01-007-7077 was assigned to the Federal Catalog?
It was assigned 49 years ago, on Sat, Aug 9, 1975
Does the NSN 5310-01-007-7077 contain any precious metals?
Type/content is unknown
Does the NSN 5310-01-007-7077 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products