Sleeve Nut

510110-801

510110-801
(NSN) National Stock Number
5310-01-149-9858
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
29735
Schedule B Code
7616995195
Summary

2b thread class, right-hand thread direction, 0.124 inches minimum and 0.134 inches maximum overall thread length, sleeve nut style, 0.455 inches minimum and 0.465 inches maximum nut length, 0.245 inches minimum and 0.255 inches maximum nut width across flats

DAC HCC DMIL RNCC
2 - - 3
RNVC SADC MSDS RNAAC
2 - - 9Z
Identification

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.

INC FIIG Concept Condition
29735 A021A0 1 1
Specifications
Thread Class
2b
Details A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
Thread Direction
right-hand
Details The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
Thread Length
0.124 inches minimum and 0.134 inches maximum overall
Details A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
Nut Style
sleeve
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.
Nut Length
0.455 inches minimum and 0.465 inches maximum
Details A measurement of the longest dimension of the nut,in distinction from width.
Nut Width Across Flats
0.245 inches minimum and 0.255 inches maximum
Details A measurement of the width across the flats of a nut.
Thread Series
unc
Details A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
Thread Quantity Per Inch
56
Details The number of threads on the item per linear inch measured on a line parallel to the thread axis.
Nominal Thread Size
0.086 inches
Details A designation that is used for the purpose of general identification of the thread.
Material
aluminum alloy 2024 overall
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
qq-a-226/6-t4 fed spec single material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment
chromate overall
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment Document And Classification
mil-c-5541,ty 2,gr c,cl 1 mil spec single treatment response overall
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Supplementary Features
ms21209-c0215,insert,screw thread 2 places and 510110-1,spacer
Details Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
Specification/Standard Data
37695-510110 manufacturers standard
Details The document designator of the specification or standard which established the item of supply.
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
- - - -
RVC WCC TCC SHC
- - - -

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
RAYTHEON COMPANY DIV RIS FORT WAYNE
CAGE: 37695
FORT WAYNE , IN , 46808-4106
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-01-149-9858
What is the NIIN of the NSN 5310-01-149-9858?
The National Item Identification Number (NIIN) of the NSN 5310-01-149-9858 is 01-149-9858
When the NSN 5310-01-149-9858 was assigned to the Federal Catalog?
It was assigned 41 years ago, on Mon, Mar 28, 1983
Does the NSN 5310-01-149-9858 contain any precious metals?
Type/content is unknown
Does the NSN 5310-01-149-9858 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA