Sleeve Nut

3472062

3472062
(NSN) National Stock Number
5310-01-096-7388
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
29735
Schedule B Code
-
Summary

+0.4396 to 0.4435 inches thread pitch diameters, right-hand thread direction, 0.116 inches minimum and 0.120 inches maximum nut length, 0.474 inches minimum and 0.477 inches maximum overall boss diameter, 0.026 inches minimum and 0.030 inches maximum overall boss thickness, 0.750 inches nominal nut width across flats

DAC HCC DMIL RNCC
1 - - 3
RNVC SADC MSDS RNAAC
2 - - ZZ
Identification

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.

INC FIIG Concept Condition
29735 A021A0 1 1
Specifications
Thread Pitch Diameters
+0.4396 to 0.4435 inches
Details The minimum and maximum pitch diameter limits of a straight screw thread.
Thread Direction
right-hand
Details The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
Nut Length
0.116 inches minimum and 0.120 inches maximum
Details A measurement of the longest dimension of the nut,in distinction from width.
Boss Diameter
0.474 inches minimum and 0.477 inches maximum overall
Details The length of a straight line which passes through the center of the boss,and terminates at the circumference.
Boss Thickness
0.026 inches minimum and 0.030 inches maximum overall
Details None.
Nut Width Across Flats
0.750 inches nominal
Details A measurement of the width across the flats of a nut.
Hole Type And Quantity
6 tapped
Details Indicates the type and number of holes provided.
Cross-Sectional Shape
round boss
Details The geometric configuration of the item when viewed in cross section.
Cross-Sectional Shape
round flange
Details The geometric configuration of the item when viewed in cross section.
Thread Series
uns
Details A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
Thread Quantity Per Inch
48
Details The number of threads on the item per linear inch measured on a line parallel to the thread axis.
Nominal Thread Size
0.453 inches
Details A designation that is used for the purpose of general identification of the thread.
Hole Thread Quantity Per Inch
56
Details The number of hole threads per linear inch measured on a line parallel to the thread axis.
Hole Configuration Style
configuration a
Details The style designation that most nearly corresponds to the appearance of the hole configuration.
Hole Nominal Thread Diameter
0.086 inches
Details The nominal length of a straight line which passes through the center of the threaded hole,and terminates at the circumference.
Part Name Assigned By Controlling Agency
navy special project
Details The name assigned to the item by the government agency or commercial organization controlling the design of the item.
Material Document And Classification
ams 5643 assn std single material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment Document And Classification
qq-p-35,ty 6 fed spec single treatment response overall
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A A -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
55190 - U -
RVC WCC TCC SHC
- 573 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
RAYTHEON COMPANY DBA RAYTHEON DIV RAYTHEON AIRBORNE RADARS
CAGE: 82577
EL SEGUNDO , CA , 90245-4501
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-01-096-7388
What is the NIIN of the NSN 5310-01-096-7388?
The National Item Identification Number (NIIN) of the NSN 5310-01-096-7388 is 01-096-7388
When the NSN 5310-01-096-7388 was assigned to the Federal Catalog?
It was assigned 44 years ago, on Fri, Jun 27, 1980
Does the NSN 5310-01-096-7388 contain any precious metals?
Does not contain precious metal
Does the NSN 5310-01-096-7388 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5310-01-096-7388?
No known electrostatic discharge

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA