Sleeve Nut

3101740-1

3101740-1
(NSN) National Stock Number
5310-01-089-6045
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
29735
Schedule B Code
7318160000
Summary

3b thread class, right-hand thread direction, 0.890 inches minimum and 0.900 inches maximum boss counterbore diameter, 1.690 inches minimum and 1.710 inches maximum nut diameter, 0.430 inches minimum and 0.450 inches maximum nut length, 1.058 inches minimum and 1.059 inches maximum overall boss diameter

DAC HCC DMIL RNCC
1 - - 3
RNVC SADC MSDS RNAAC
2 - - KZ
Identification

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.

INC FIIG Concept Condition
29735 A021A0 1 1
Specifications
Thread Class
3b
Details A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
Thread Direction
right-hand
Details The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
Counterbore Diameter
0.890 inches minimum and 0.900 inches maximum boss
Details The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.
Nut Diameter
1.690 inches minimum and 1.710 inches maximum
Details None.
Nut Length
0.430 inches minimum and 0.450 inches maximum
Details A measurement of the longest dimension of the nut,in distinction from width.
Boss Diameter
1.058 inches minimum and 1.059 inches maximum overall
Details The length of a straight line which passes through the center of the boss,and terminates at the circumference.
Boss Thickness
0.220 inches minimum and 0.240 inches maximum overall
Details None.
Nut Counterbore Depth
0.220 inches minimum and 0.240 inches maximum boss
Details The measurement of the enlarged portion adjacent to the threaded portion of a nut,in distinction from height.
Cross-Sectional Shape
round boss
Details The geometric configuration of the item when viewed in cross section.
Thread Series
unef
Details A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
Thread Quantity Per Inch
20
Details The number of threads on the item per linear inch measured on a line parallel to the thread axis.
Hardness Rating
32.0 rockwell c minimum and 48.0 rockwell c maximum
Details A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
Nominal Thread Size
0.875 inches
Details A designation that is used for the purpose of general identification of the thread.
Countersink Angle
80.0 degrees minimum and 100.0 degrees maximum boss
Details The included angle of the countersink.
Material
steel comp 4340 overall
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
ams 6415 assn std single material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
55190 - U -
RVC WCC TCC SHC
- 573 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Genuine Manufacturers Parts
  • 100% Product Inspection
  • 7 Year Sales Record Retention
  • Fast On-Time Delivery
  • HAZMAT Certified
  • Global Shipping
Manufacturer
HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - PHOENIX
CAGE: 99193
PHOENIX , AZ , 85034-2802
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-01-089-6045
What is the NIIN of the NSN 5310-01-089-6045?
The National Item Identification Number (NIIN) of the NSN 5310-01-089-6045 is 01-089-6045
When the NSN 5310-01-089-6045 was assigned to the Federal Catalog?
It was assigned 44 years ago, on Tue, Feb 5, 1980
Does the NSN 5310-01-089-6045 contain any precious metals?
Type/content is unknown
Does the NSN 5310-01-089-6045 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Who we are?

We are a trusted provider of milspec and aerospace hardware, offering high-quality consumables and parts. With a commitment to excellence, we guarantee reliable and fast delivery through our network of logistics centers. Our mission is to support the aerospace industry with precision and efficiency.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 Aerospace Hardware Store, Inc. All rights reserved.
Made in USA