Round Plain Nut
GN10FM64
(NSN) National Stock Number
5310-00-143-9535
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
15887
Schedule B Code
7616995195
Summary
3b thread class, right-hand thread direction, 0.146 inches minimum and 0.166 inches maximum drive point depth, round nut style, 4.484 inches minimum and 4.516 inches maximum nut diameter, 0.328 inches minimum and 0.359 inches maximum nut thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. See also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15887 | A021A0 | 1 | 1 |
Specifications
Thread Class
3b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Drive Point Depth
0.146 inches minimum and 0.166 inches maximum
Details
None.Nut Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Nut Diameter
4.484 inches minimum and 4.516 inches maximum
Details
None.Nut Thickness
0.328 inches minimum and 0.359 inches maximum
Details
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.Drive Point Width
0.240 inches minimum and 0.260 inches maximum
Details
None.Drive Point Quantity
2
Details
None.Drilled Hole Diameter
0.045 inches nominal
Details
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.Hole Type And Quantity
6 drilled
Details
Indicates the type and number of holes provided.Thread Series
unj
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
16
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
4.000 inches
Details
A designation that is used for the purpose of general identification of the thread.Hole Configuration Style
configuration j
Details
The style designation that most nearly corresponds to the appearance of the hole configuration.Countersink Angle
90.0 degrees nominal nut
Details
The included angle of the countersink.Part Name Assigned By Controlling Agency
navy special project
Details
The name assigned to the item by the government agency or commercial organization controlling the design of the item.Material
aluminum alloy 7075 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-225/9 temper t7351 fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Specification/Standard Data
26512-gn10fm manufacturers standard
Details
The document designator of the specification or standard which established the item of supply.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV MISSION SYSTEMS
CAGE: 26512
BETHPAGE
, NY
, 11714-1035
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-00-143-9535
What is the NIIN of the NSN 5310-00-143-9535?
The National Item Identification Number (NIIN) of the NSN 5310-00-143-9535 is 00-143-9535
When the NSN 5310-00-143-9535 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Mon, Jan 15, 1973
Does the NSN 5310-00-143-9535 contain any precious metals?
Does not contain precious metal
Does the NSN 5310-00-143-9535 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5310-00-143-9535?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.