Round Plain Nut
6709769
(NSN) National Stock Number
5310-00-032-9682
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
15887
Schedule B Code
7318160000
Summary
3b thread class, right-hand thread direction, 0.105 inches minimum and 0.115 inches maximum drive point depth, round nut style, 1.865 inches minimum and 1.885 inches maximum nut diameter, 0.490 inches minimum and 0.510 inches maximum nut thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. See also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15887 | A021A0 | 1 | 1 |
Specifications
Thread Class
3b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Drive Point Depth
0.105 inches minimum and 0.115 inches maximum
Details
None.Nut Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Nut Diameter
1.865 inches minimum and 1.885 inches maximum
Details
None.Nut Thickness
0.490 inches minimum and 0.510 inches maximum
Details
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.Drive Point Width
0.364 inches minimum and 0.385 inches maximum
Details
None.Drive Point Quantity
6
Details
None.Drilled Hole Diameter
0.104 inches nominal
Details
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.Hole Type And Quantity
6 drilled
Details
Indicates the type and number of holes provided.Thread Series
unef
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
18
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Hardness Rating
26.0 rockwell c minimum and 32.0 rockwell c maximum
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Nominal Thread Size
1.125 inches
Details
A designation that is used for the purpose of general identification of the thread.Hole Configuration Style
configuration f
Details
The style designation that most nearly corresponds to the appearance of the hole configuration.Countersink Angle
119.0 degrees minimum nut and 121.0 degrees maximum nut
Details
The included angle of the countersink.Material
steel comp 8735 overall or steel comp 8740 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6320 assn std 1st material response overall or ams 6282 assn std 1st material response overall or ams 6322 assn std 2nd material response overall or ams 6323 assn std 2nd material response overall or ams 6324 assn std 2nd material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
ams 2400 assn std single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 6709769 | 29953 | 5 | - | 5 | 2 | - | ZZ |
| 6709769 | 73342 | 5 | - | 5 | 9 | - | XX |
| 6709769 | 22059 | 5 | - | 5 | 2 | - | ZZ |
| 6709769 | 14554 | 5 | - | 5 | 9 | - | ZZ |
| 6709769 | 24617 | 5 | - | 5 | 9 | - | XX |
| 6709769 | 73625 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 5310-00-032-9682
What is the NIIN of the NSN 5310-00-032-9682?
The National Item Identification Number (NIIN) of the NSN 5310-00-032-9682 is 00-032-9682
When the NSN 5310-00-032-9682 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5310-00-032-9682 contain any precious metals?
Type/content is unknown
Does the NSN 5310-00-032-9682 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products