Round Plain Nut
152224
(NSN) National Stock Number
5310-00-095-3460
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
15887
Schedule B Code
7318160000
Summary
+3.8834 to 3.8874 inches thread pitch diameters, right-hand thread direction, 3.974 inches minimum nut and 3.994 inches maximum nut counterbore diameter, 4.850 inches minimum and 4.870 inches maximum small end diameter, 0.156 inches nominal drive point depth, round nut style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. See also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15887 | A021A0 | 1 | 1 |
Specifications
Thread Pitch Diameters
+3.8834 to 3.8874 inches
Details
The minimum and maximum pitch diameter limits of a straight screw thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Counterbore Diameter
3.974 inches minimum nut and 3.994 inches maximum nut
Details
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.Small End Diameter
4.850 inches minimum and 4.870 inches maximum
Details
The length of a straight line which passes through the center of the small end,and terminates at the circumference.Drive Point Depth
0.156 inches nominal
Details
None.Nut Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.Nut Diameter
5.162 inches minimum and 5.182 inches maximum
Details
None.Nut Thickness
1.094 inches minimum and 1.098 inches maximum
Details
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.Drive Point Width
0.490 inches minimum and 0.510 inches maximum
Details
None.Undercut Thickness
0.776 inches minimum and 0.792 inches maximum
Details
None.Drive Point Quantity
8
Details
None.Nut Counterbore Depth
0.521 inches minimum nut and 0.541 inches maximum nut
Details
The measurement of the enlarged portion adjacent to the threaded portion of a nut,in distinction from height.Thread Series
uns
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
12
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
3.938 inches
Details
A designation that is used for the purpose of general identification of the thread.Special Features
2 grooves on periphery of 4.850-4.870 in.dia
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 9310 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 6260 assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Genuine Manufacturers Parts
- 100% Product Inspection
- 7 Year Sales Record Retention
- Fast On-Time Delivery
- HAZMAT Certified
- Global Shipping
Manufacturer
PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP.
CAGE: 00198
LONGUEUIL
, QC
, J4G 1A1
CANADA
View Products
FAQs
Frequently asked questions for NSN 5310-00-095-3460
What is the NIIN of the NSN 5310-00-095-3460?
The National Item Identification Number (NIIN) of the NSN 5310-00-095-3460 is 00-095-3460
When the NSN 5310-00-095-3460 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5310-00-095-3460 contain any precious metals?
Type/content is unknown
Does the NSN 5310-00-095-3460 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.